PREV 9th July, 2018 NEXT

Latest News & White Papers this Week

9 July, 2018 - everything RF Newsletter
 
everything RF
Date: 9 July, 2018
 
Sponsored by PCB Directory
 
 
 
Latest News this Week
World’s First CMOS 140 GHz Radar-on-Chip System with Integrated Antenna - Imec
German Company Develops Innovative Flat Panel Antennas for Satellite Communications Systems - ALCAN Systems
Aaronia Drone Detection System Used to Supervise the Kim Jong & Donald Trump Meeting - Aaronia AG
Leti Completes LPWA Field Trials of New Waveform for 5G IoT Networks - Leti
Qorvo FEM Powers New Commercial 802.11ax Carrier Gateway - Qorvo
Transmitter with Ultra Fast Frequency Hopping to Protect Wireless Data from Hackers - MIT
5G Chipset Market to Reach $22.41 Billion by 2026 - ResearchAndMarkets
Single Antenna Solution for Cellular and GNSS Technologies - Fractus Antennas
Ultra-Low-Power Sigfox-Verified Modules for the IoT Market - STMicroelectronics
Elisa Launches World's First Commercial 5G Network in Finland - Elisa
More News
New White Papers
4 Ways to Build Your Power Supply Skill Set - Keysight Technologies
Technical Reference Manual for RF Interconnects - MegaPhase
Top 8 Reasons to Use an Oscillator Instead of a Crystal Resonator - SiTime
Shielding Effectiveness Test Guide - AH Systems Inc
Overcoming the RF Challenges of Full-Screen Smartphones - Qorvo
More White Papers
Upcoming Event
Event Image
RFIT 2018

Date: 15 to 17 August 2018

Location: Melbourne, Australia

 
More Events
Featured White Paper
Keysight
Download eBook & Get Tips to Build Your Power Supply Skill Set
More of today's design problems are being caused by the systems that power them. Designs are placing higher demands on their power systems and so during the design phase, your power supply needs to be able to provide reliable power to your device under test. Learn expert tips in this eBook so you can better understand these issues and how to prevent them. Download the eBook.
 
 
 
Featured Products this Week
Antenna
Ultra-Slim Chip Antenna for GNSS and Cellular Applications

Antenna from Fractus Antennas

The FR01-S4-210 (TRIO mXTEND) from Fractus Antennas is a chip antenna that operates in 698-960 MHz, 1561-1606 MHz, 1710-2690 MHz and 3400-3800 MHz bands for 3G, 4G, 5G and GNSS Applications. It offers the flexibility to be tuned at the frequency regions of interest through the proper adjustment of the matching network.
 
Download Datasheet | Product Details
 
RF Amplifier
50 W Solid State Broadband High Power Amplifier from 1 to 30 MHz

RF Amplifier from Empower RF

The 1213 from Empower RF is a 50 watt solid state broadband high power amplifier that operates from 1 to 30 MHz. This amplifier module is ideal for HF broadband and specific high power linear applications. It has been developed using push-pull LDMOS power devices that provide high gain, high efficiency, wide dynamic range low distortions and good linearity.
 
Download Datasheet | Product Details
 
Balun
Blindmate (snap-in) Broadband Balun from 5 MHz to 20 GHz

Balun from HYPERLABS Inc.

The HL9452 from Hyperlabs is a blindmate (snap-in) broadband balun that operates from 5 MHz to 20 GHz. It transforms a 50 ohm input in to a 100 ohm Differential output and thus can be used either as a signal splitter or combiner. The balun has an optimal amplitude match of 0.25 dB and a phase match of 4 degrees up to 20 GHz.
 
Download Datasheet | Product Details
 
RF Amplifier
K-Band Low Noise Amplifier from 17.7 to 22 GHz

RF Amplifier from ERZIA

The ERZ-LNA-1770-2200-70-2 from ERZIA is a K band Low Noise Amplifier that operates from 17.7 to 22 GHz. It provides a high gain of 70 dB with a low noise figure of 2 dB across the band. The amplifier includes an output isolator and requires a supply voltage of 18 V. It is available in a module with a WR42 interface at the input and 2.92 mm Female connectors at the output.
 
Download Datasheet | Product Details
 
RF Mixer
18 to 46 GHz Double-Balanced Mixer

RF Mixer from MACOM

The MAMX-011054 from MACOM is a double-balanced passive diode mixer with a RF/LO frequency from 18 to 46 GHz and IF frequency from DC to 20 GHz. It has a conversion loss of 6.5 dB, high LO to RF isolation of 35 dB, and an input IP3 of 20 dBm across the bandwidth. The mixer is available is available in a 3 mm, 12-lead AQFN package and is ideal for applications such as test and measurement, microwave radios and radars. The MAMX-011054 is also available in die form.
 
Download Datasheet | Product Details
 
RF Mixer
0.1 to 5.0 GHz Up/Down-Converter Mixer with an Integrated LO Buffer

RF Mixer from Guerrilla RF

The GRF7001 from Guerrilla RF is a high linearity mixer with integrated LO buffer. The mixer has an RF/IF frequency range of 0.1 to 5.0 GHz, and the LO range is 0.1 to 4.0 GHz. It has low conversion loss and can be used as an up or down converter. The GRF7001 inputs and outputs are single-ended and internally matched to 50 ohms.
 
Product Details
 
RF Mixer
5 GHz to 21 GHz RF Mixer with an Integrated Balun

RF Mixer from Mini Circuits

The MDB-24H+ is a frequency mixer with an RF/LO frequency from 5 GHz to 21.5 GHz and IF frequency from 0 to 5 GHz. The mixer is fabricated using InGaP HBT technology with integrated LO and RF Baluns. The mixer measures 4 x 4 x 1 mm and is available in a surface mount package. It can be used for SATCOM, Commercial and military radars, WiFi and ISM band applications.
 
Download Datasheet | Product Details
 
RF Switch
0.4 to 3.8 GHz CMOS, Silicon-On-Insulator DPDT Switch

RF Switch from Skyworks

The SKY13596-397LF from Skyworks is a CMOS, Silicon-On-Insulator DPDT switch that operates from 0.4 to 3.8 GHz. The switch has an isolation of 21 dB, an insertion loss of 0.5 dB and has GSM power handling capabilities. It is available in a QFN 2 x 2 x 0.55 mm package and is ideal for diversity antenna switching or for switching between simultaneous voice and LTE systems.
 
Download Datasheet | Product Details
 
RF Amplifier
20 W GaN Power Amplifier Module from 6 to 18 GHz

RF Amplifier from KeyLink Microwave

The KB60180M43A from KeyLink Microwave is a multi-octave high power amplifier module that operates from 6 to 18 GHz. It provides a saturated output power of 20 Watts with a gain of 40 dB. This GaN Amplifier is available in a module that measures 150 x 90 x 25 mm with SMA female connectors and is ideal for jamming, EMC, test and measurement applications.
 
Download Datasheet | Product Details
 
Vector Network Analyzer
300 kHz to 20 GHz USB-Controlled Compact Vector Network Analyzer

Vector Network Analyzer from Keysight Technologies

The P9374A from Keysight is a USB-Controlled Compact Vector Network Analyzer that operates from 300 kHz to 20 GHz. Controlled via PC through a USB connection, this VNA help customers save space on the test bench and is easily shared among members of a development team. The 2 port compact VNA has a measurement speed of 14 msec with a dynamic range of up to 115 dB and a directivity of below 52 dB.
 
Download Datasheet | Product Details
 
RF Shielded Test Enclosure
RF Shielded Test Enclosure for Applications up to 6 GHz

RF Shielded Test Enclosure from RF Electronics

The HDRF-1560-A from RF Electronics is a RF Shielded Test Enclosure that can be used to test devices operating up to 6 GHz. It has a thick RF absorbing foam that provides a reflection loss of over 18 dB at 2.4 GHz. The test enclosure has shielded power filters which can be used to power devices placed inside the enclosure while blocking all wireless signals.
 
Download Datasheet | Product Details
 
Signal Generator
1 GHz / 3 GHz / 6 GHz RF Signal Generator

Signal Generator from Rohde & Schwarz

The R&S SMB100B is a compact analog signal generator available in various frequency options from 8 kHz to 1 GHz, 3 GHz and 6 GHz. The generator can deliver up to 34 dBm of output power (at 1 GHz carrier frequency) without an external amplifier. It provides an outstanding single sideband (SSB) phase noise of < -134 dBc (meas.) at 1 GHz and an offset of 20 kHz.
 
Download Datasheet | Product Details
 
RF Amplifier
Ka Band Low Noise Amplifier from 26.5 to 40 GHz

RF Amplifier from SAGE Millimeter

The SBL-2734034025-2F2F-E3 from Sage Millimeter is a low noise amplifier that operates from 26.5 to 40 GHz. This LNA provides a P1dB of 13 dBm and gain of 40 dB with a noise figure of 2.5 dB. It requires a 12 VDC supply while drawing 200 mA of current. The amplifier is available in a module with 2.4 mm Female connectors and is ideal for 5G systems, radar systems, low noise receivers and communication systems.
 
Download Datasheet | Product Details
 
RF Switch
Coaxial SP16T Switch from 0.5 to 43.5 GHz

RF Switch from RF-Lambda

The RFSP16TA5M43G from RF-Lambda is an absorptive coaxial SP16T Switch that operates from 0.5 to 43.5 GHz. It can handle up to 0.5 watts of CW power and has a switching speed of below 70 ns. The switch has an insertion loss of 14 dB and an isolation of over 50 dB. It requires +5V/-5V biasing and is available in a circulator module with SMA - Female input and output connectors.
 
Download Datasheet | Product Details
 
Voltage Controlled Oscillator
High Performance, Low Phase Noise VCO from 173 to 192 MHz

Voltage Controlled Oscillator from Z-COMM

The V200ME07-LF from Z-communications is a Voltage Controlled Oscillator which can be tuned to a frequency from 173 to 192 MHz with a tuning voltage from 0.5 to 4.5 V. This VCO provides a spectrally clean signal with a phase noise as low as -120 dBc/Hz at 10 kHz offset while operating on a supply of 5 Vdc and consuming less than 17 mA of current.
 
Download Datasheet | Product Details
 
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest industry news, information on new product releases, new white papers, upcoming events and much more.

To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]