PREV 25th July, 2018 NEXT

New RF & Microwave Products this Week

25 July, 2018 - everything RF Newsletter
 
everything RF
Date: 25 July, 2018
 
Sponsored by Coilcraft
 
 
 
New RF & Microwave Products this Week
RF & Microwave Isolator
RF Isolator from 700 to 800 MHz

RF & Microwave Isolator from MECA

The IN-0.750 from MECA is a RF and Microwave Isolator that operates from 700 to 800 MHz. It provides an isolation of more than 17 dB and an insertion loss of up to 0.50 dB. The isolator can handle an average power of 2 Watts and has a VSWR of 1.30:1. It is available in a module with N-type female connectors.
 
Download Datasheet | Product Details
 
RF Detector
2 to 6 GHz Temperature Compensated Directional Power Detector

RF Detector from MACOM

The MACP-010571 is a Temperature Compensated Directional Power Detector that operates from 2 to 6 GHz. It can detect a minimum power of -15 dBm. It is available in a 1.5 x 1.2 mm 6-lead TDFN package and is well suited for applications including power monitoring and leveling in Point-to-Point radios, IMS, Radar, VSAT, EW, and Aerospace & Defense systems.
 
Download Datasheet | Product Details
 
RF Transistor
250 W LDMOS Power Transistor for 2.4 GHz RF Energy Applications

RF Transistor from Ampleon

The BLC2425M10LS250 from Ampleon is a LDMOS power amplifier transistor for RF energy applications that operates from 2400 to 2500 MHz. It provides up to 250 watts of power with a high gain of 14.4 dB and efficiency of up to 69%. This rugged device is capable of withstanding a load mismatch of up to VSWR 20:1. It has integrated ESD protection and internal input matching.
 
Download Datasheet | Product Details
 
RF Amplifier
3.4 to 3.8 GHz Power Amplifier for Wireless Infrastructure Applications

RF Amplifier from Skyworks Solutions

The SKY66293-21 from Skyworks is a high-efficiency power amplifier that operates from 3.4 to 3.8 GHz. It provides an output power of 4 watts and a gain of 35 dB with a PAE of 29%. The PA operates from a single supply voltage of 5 V. It is available in a compact 5 x 5 x 1.3 mm package and is ideal for active antenna arrays, massive MIMO, CBRS, FDD and TDD 2G/3G/4G LTE systems.
 
Download Datasheet | Product Details
 
Front End Module
1.8 to 4.2 GHz Dual Channel Switch + LNA Module

Front End Module from Qorvo

The QPB9319 from Qorvo is a highly integrated front end module developed for TDD base stations. It consists of a high power SPDT switch and a two-stage Low Noise Amplifier that operate from 1.8 to 4.2 GHz. The second stage LNA is capable of going into bypass mode. The switch is based on SOI technology and can handle input RF power signals of up to 5W average power assuming an 8 dB PAR.
 
Download Datasheet | Product Details
 
RF Amplifier
20 W GaN Solid-State Power Amplifier from 800 to 2500 MHz

RF Amplifier from NuWaves Engineering

The NW-PA-15D05A from NuWaves is a GaN solid-state power amplifier that operates from 800 to 2500 MHz. It delivers more than 20 watts of RF power with an efficiency of 25% to extend the operational range of data links and transmitters. The PA provides a gain of up to 61 dB for continuous wave (CW) and near-constant envelope waveforms.
 
Download Datasheet | Product Details
 
Sponsored by Coilcraft
Chip Inductors
New Chip Inductors Offer Highest L in an 0201 Sized Package
Coilcraft 0201HL Series chip inductors are available in seven inductance values ranging from 22 to 51 nH, the highest currently offered in a wirewound 0201 package. This range is fully optimized for impedance matching in 700 MHz band LTE and 5G applications. Click Here for Free Samples!
 
 
 
RF & Microwave Circulator
120 W Coaxial Circulator from 0.7 to 1 GHz

RF & Microwave Circulator from Renaissance Electronics Corporation

The 3A2BAE from Renaissance Electronics is a coaxial circulator that operates from 0.7 to 1 GHz. It provides an isolation of 16 dB and an insertion loss of 0.7 dB. The circulator can handle up to 120 Watts of power. It is available in a module that measures 1.50 x 1.67 x 1.01 inches and is ideal for satellite communication applications.
 
Download Datasheet | Product Details
 
Between Series RF Adapter
3.5 mm NMD jack to N jack Between Series Adapter up to 18 GHz

Between Series RF Adapter from Jyebao

The ADS-VNAPC8N8 from Jyebao is a 3.5 mm NMD jack to N jack coaxial adapter that operates up to 18 GHz. It has a VSWR of up to 1.15:1 and is matched to 50 ohms. The adapter has a stainless steel body with a Beryllium Copper center contact.
 
Download Datasheet | Product Details
 
RF Mixer
High Isolation Double Balanced Mixer from 2 to 12 GHz

RF Mixer from Marki Microwave

The MM1-0212LSM is a low power GaAs MMIC double balanced mixer with an RF/LO frequency from 2 to 12 GHz and IF frequency from DC to 3 GHz. The mixer has an IP3 of 12 dBm, a low conversion loss and high LO to RF isolation at extremely low LO drives. It is ideal for radio, radar, electronic warfare, and sub-6 GHz 5G applications.
 
Download Datasheet | Product Details
 
RF Amplifier
GaN Power Amplifier from 26 to 28 GHz

RF Amplifier from Custom MMIC

The CMD262 from Custom MMIC is a 5 W GaN MMIC power amplifier that operates from 26 to 28 GHz (K, Ka Band). This power amplifier die provides over 26 dB of gain, has 1 dB compression point of +37.5 dBm and a saturated output power of +38.5 dBm at 30% power added efficiency. It is matched to 50 ohms eliminating the need for external DC blocks and RF port matching.
 
Download Datasheet | Product Details
 
RF Switch
SPDT Absorptive Electro-Mechanical Switch from DC to 40 GHz

RF Switch from RF-Lambda

The RFSPDT40EMC-T from RF-Lambda is an absorptive Electro-Mechanical SPDT Switch that operates from DC to 40 GHz. It can handle up to 1 watt of power and has a switching speed of below 20 ms. The switch has an insertion loss of under 1 dB and an isolation of over 70 dB. It is available in a module with 2.92 mm Female connectors. This switch guarantees a repeatability of 0.05dB up to 1 million cycles.
 
Download Datasheet | Product Details
 
RF Variable Attenuator
50 GHz Digital Step Attenuator for 5G mm-Wave Applications

RF Variable Attenuator from pSemi

The PE43508 from pSemi is a 6-bit, 50-ohm Digital Step Attenuator that operates from 9 kHz to 50 GHz. It has a 31.5 dB attenuation range in 0.5 dB and 1 dB steps, and it is capable of maintaining 0.5 dB and 1 dB monotonicity through its 50 GHz bandwidth. This high-performance DSA features low insertion loss, fast switching time and low attenuation error.
 
Download Datasheet | Product Details
 
Sponsored by Coilcraft
 
 
 
Power Divider
16-Way Power Divider from 695 to 2700 MHz

Power Divider from Mini Circuits

The ZB16PD-272-75F+ from Mini-Circuits is a 16-way power divider that operates from 695 to 2700 MHz. This power divider can handle up to 5 watts of power, has an insertion loss of 1 dB and isolation over 14 dB. It is available in a module with F-type connectors and is ideal for CATV, WiMAX and L-band applications.
 
Download Datasheet | Product Details
 
Waveguide Combiner / Divider
4-Way, 180° Waveguide Power Divider from 50 to 75 GHz

Waveguide Combiner / Divider from SAGE Millimeter

The SWP-50375304-15-E1 from Sage Millimeter is a 4 Way 180° Power Divider that operates from 50 to 75 GHz. The power divider has an insertion loss of 1.0 dB at each output port and an isolation of 20 dB. The ports are well balanced and in phase for either power dividing or power combining applications across the full band.
 
Download Datasheet | Product Details
 
Antenna
Dual Band Flexible PIFA Antenna for Wi-Fi MIMO Applications

Antenna from Laird Technologies

The EFD2455A3S-10MHF1 from Laird is a flexible, 2.4/5 GHz, dual element PIFA (Planar Inverted-F Antenna) antenna for 802.11ac/ax applications and 802.11a/b/g/n Wi-Fi modules that use MIMO or Wi-Fi diversity. It delivers a gain of up to 3.5 dBi and can handle an input power of less than 10 watts. It has two integrated antenna elements, optimized for MIMO and diversity radio performance.
 
Download Datasheet | Product Details
 
Wireless SoC
Highly Integrated 2.4 GHz 802.11b/g/n Wi-Fi SoC for IoT Applications

Wireless SoC from Espressif Systems

The ESP8266EX is a low-power, highly-integrated certified 2.4 GHz (802.11 b/g/n) Wi-Fi SoC solution for IoT Applications. This compact SoC consists of a 32-bit Tensilica processor, standard digital peripheral interfaces, antenna switches, RF balun, power amplifier, low noise receive amplifier, filters and power management modules.
 
Download Datasheet | Product Details
 
Wireless Charging Solution
15 W Wireless Charging Receiver IC (WPC + MPWG Complaint)

Wireless Charging Solution from NXP Semiconductors

The MWPR1516 from NXP is a Wireless Charging Receiver IC, based on the ARM Cortex-M0+ core, that supports up to 15 watt charging power. This IC is complaint with Wireless Power Consortium (WPC) and Medium Power Working Group (MPWG) specifications. It has AC/DC conversion and modulation/demodulation circuit for bi-directional communication to support industrial standards with foreign object detection (FOD).
 
Download Datasheet | Product Details
 
RF Shielded Test Enclosure
RF Shielded Test Enclosure from 20 MHz to 6 GHz

RF Shielded Test Enclosure from RF Electronics

The HDRF-7370 from RF Electronics is a Standalone Portable RF Shielded Test Enclosure that operates from 20 MHz to 6 GHz. This fully portable design is equipped with caster wheels for ease of movement. It has a thick RF absorbing foam that provides an isolation of more than 120 dB @ 3 GHz. It has shielded power filters which can be used to power the devices placed inside the enclosure while blocking all wireless signals.
 
Download Datasheet | Product Details
 
RF Test Set
Multi-DUT Connectivity Test System from 860 to 6000 MHz

RF Test Set from LitePoint

IQxel-M8 is a test box that supports multiple connectivity technologies with banded frequency coverage from 860 to 6000 MHz. This test set can be configured to test up to eight (8) SISO devices in parallel, or up to four (4) devices in a 2x2 MIMO configuration. The system is available in a standard 19” rack mount unit that measures 370 x 82 x 508 mm.
 
Download Datasheet | Product Details
 
Noise Source
10 Hz to 40 GHz Programmable Gaussian Noise Generator

Noise Source from Noisecom

The UFX7000A from Noisecom is a Programmable Gaussian (AWGN) Noise Generator that operates from 10 Hz to 40 GHz. The standard configuration has a broadband noise source and noise path attenuator with a maximum attenuation range of 127 dB in 1 dB steps. It is available in a rack mount unit that measures 17.25 x 6.50 x 19.50 inches with SMA female connectors.
 
Download Datasheet | Product Details
 
About everything RF
everything RF keeps users up to date with the RF & Microwave industry. Every week we send out a newsletter that lists interesting new products that have been recently released. Our editorial team keeps track of over 1000 manufacturers to keep you up to date with the latest developments.

To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]