1. everything RF
  2. RF Newsletters
more
PREV 23rd July, 2018 NEXT

Latest RF News & White Papers this Week

23 July, 2018 - everything RF Newsletter
 
everything RF
Date: 23 July, 2018
 
Sponsored by Signal Hound
 
 
 
Latest News this Week
Ampleon Introduces High Efficiency 250 Watt LDMOS Transistor for RF Energy Applications - Ampleon
Mini-Circuits and Vayyar to Provide Educational VNA Project Kits for RF Engineers - Mini Circuits
World’s First Embedded Planar Inverted-F Antenna for Wi-Fi MIMO Applications - Laird Technologies
Aaronia AARTOS Anti-Drone System Used to Protect the NATO Summit in Brussels - Aaronia AG
R&S and MediaTek to Develop mm-Wave OTA Measurement Technologies - Rohde & Schwarz
Cobham Launches Anti-Jamming GPS Solutions for Air, Land and Sea - Cobham Signal & Control Solutions
New CRFS Software Toolkit Enables Precise and Detailed RF Spectrum Analysis - CRFS
Infineon Has Shipped over 5 Billion Bulk-CMOS RF Switches - Infineon Technologies
Link Microtek Develops 9-Way Radial Combiner for BAE Systems' S-Band Radar - Link Microtek
Flat Panel, Beam-Steering Ka-Band Phased Array Antennas for Aircrafts - Arralis
New on Chip Molecular Clock to Enhance Navigational Capabilities of Consumer Devices - MIT
Skyworks Q3 FY18 Earnings Once Again Exceed Expectations - Skyworks Solutions
More News
New White Papers
Synthesize and Build a Custom HDTV Antenna - National Instruments
The Future of EMC Test Laboratory Capabilities - Rohde & Schwarz
Overcoming the Challenges of On-Wafer Load Pull Measurements at mmWave Frequencies for 5G Applications - Maury Microwave
77 GHz Single Chip Radar Sensor Enabling Automotive Body and Chassis Applications - Texas Instruments
Top 8 Reasons to Use an Oscillator Instead of a Crystal Resonator - SiTime
More White Papers
Upcoming Event
Event Image
VSAT Global

Date: 18 to 20 September, 2018

Location: Park Plaza Victoria Hotel, London

 
More Events
Sponsored by Signal Hound
VSG25A
Low-Cost Vector Signal Generator from Signal Hound
Generate analog, digital and arbitrary waveforms with our 100 MHz to 2.5 GHz VSG25A Vector Signal Generator. This USB-powered tool features a 12-bit I/Q baseband arbitrary waveform generator which can be clocked at virtually any frequency from 54 kHz to 180 MHz. Powerful software and API are included. Ready to ship for $495! Click here to learn more.
 
 
 
Featured Products this Week
Signal Generator
10 MHz to 20 GHz Phase Coherent Signal Generators

Signal Generator from Berkeley Nucleonics Corporation

The Model 855 Series are phase coherent multi-output signal generators that operate from 10 MHz to 6.2 GHz, 12.5 GHz or 20 GHz. The generators have up to 8 independent outputs and a switching speed of under 0.02 ms. The 855 is ideally suited for a wide range of application, where good signal quality accurate and wide output power range is required.
 
Download Datasheet | Product Details
 
RF Module
LoRaWAN + BLE Module with Integrated Antenna

RF Module from Onethinx

The Onethinx LoRaWAN Core module is a ready-to-use LoRaWAN + Bluetooth low energy module. It consists of Cypress's PSoC 6 with built-in Bluetooth Low Energy wireless connectivity and Semtech's sub-GHz radio transceiver SX1261. The module can transmit up to +15 dBm of power with a highly efficient integrated power amplifier and consumes up to 4.2 mA of current in receive mode.
 
Download Datasheet | Product Details
 
Cellular Module
Size-optimized LTE Cat M1/NB1 and EGPRS Module

Cellular Module from u-blox AG

The SARA-R412M from u-blox is a LTE Cat M1, NB-IoT, and quad band 2G (EGPRS) module for worldwide coverage. Using this module, developers can select their own desired frequencies and operator configurations. It ensures data integrity between applications via secure communication protocols, notably including two-way authentication between the client and server, a strategy often utilized with cloud services.
 
Download Datasheet | Product Details
 
Frequency Synthesizer
250 kHz to 20 GHz Multi-Channel Frequency Synthesizers

Frequency Synthesizer from Holzworth Instrumentation

The HS9000 Series from Holzworth are Multi-Channel Frequency Synthesizers that operate from 250 kHz to 20 GHz. This is a unique platform that allows users to specify custom configurations for a COTS product. Units can be fitted with anywhere from 1 to 8 channels with the ability to specify each channel's frequency limits and performance options.
 
Download Datasheet | Product Details
 
RF Switch
7 to 18 GHz Absorptive SP20T Pin Diode Switch

RF Switch from Planar Monolithics Industries

The P20T-7G18G-80-T-515-SFF-SP from PMI RF is an absorptive SP20T pin diode switch that operates from 7 to 18 GHz. The switch has an insertion loss of less than 7.5 dB with an isolation of over 65 dB and a switching speed of under 1 µs. It can handle an input power of up to 1 W CW and is available in a module with SMA female connectors.
 
Download Datasheet | Product Details
 
RF Shielded Test Enclosure
RF Shielded Test Enclosure from 20 MHz to 6 GHz

RF Shielded Test Enclosure from RF Electronics

The HDRF-7370 from RF Electronics is a Standalone Portable RF Shielded Test Enclosure that operates from 20 MHz to 6 GHz. This fully portable design is equipped with caster wheels for ease of movement. It has a thick RF absorbing foam that provides an isolation of more than 120 dB @ 3 GHz. It has shielded power filters which can be used to power devices placed inside the enclosure while blocking all wireless signals.
 
Download Datasheet | Product Details
 
RF Amplifier
100 W GaN Amplifier Module from 0.5 to 2.7 GHz

RF Amplifier from KeyLink Microwave

The KB0527M50A from KeyLink Microwave is a multi-octave high power amplifier that operates from 0.5 to 2.7 GHz. This GaN amplifier provides a saturated output power of 100 Watts with a gain of 51 dB. It is available in a module that measures 180 x 90 x 25 mm with SMA female connectors and is ideal for jamming, EMC, test and measurement applications.
 
Download Datasheet | Product Details
 
Power Divider
6 Way, 30 W Power Divider from 0.5 to 6 GHz

Power Divider from MECA

The 806-2-3.250WWP from MECA is a 6-way power divider that operates from 0.5 to 6 GHz covering all ISM and Public Safety bands. It can handle up to 30 watts of power, has an insertion loss of under 3 dB and isolation over 13 dB. The power divider is available in a module with SMA Female connectors.
 
Download Datasheet | Product Details
 
RF Switch
SP4T Pin Diode Switch from 0.5 to 18 GHz

RF Switch from L3 Narda-MITEQ

The SS142DHS from L3 Narda-MITEQ is a SP4T PIN Diode Switch that operates from 0.5 to 18 GHz. The switch has an insertion loss of less than 3.2 dB with an isolation of over 60 dB and a switching speed of under 20 ns. It can handle an input power of up to 200 W.
 
Download Datasheet | Product Details
 
RF Variable Attenuator
50 MHz to 6 GHz USB Controlled Attenuator

RF Variable Attenuator from Adaura Technologies

The AD-USB2A12G315 from Adaura Technologies is a 2 Channel, programmable attenuator that operates from 0.5 to 6 GHz. The attenuator has a attenuation range from 0 to 31.5 dB with a step size of 0.5 dB. It provides more than 50 dB of chain to chain isolation thereby suppressing adjacent leakage levels to below receive sensitivity.
 
Download Datasheet | Product Details
 
Wireless Charging Solution
15 Watt Wireless Charging Receiver IC

Wireless Charging Solution from NXP Semiconductors

The MWPR1516 from NXP is a Wireless Charging Receiver IC, based on the ARM Cortex-M0+ core, that supports up to 15 watt charging power. This IC is complaint with Wireless Power Consortium (WPC) and Medium Power Working Group (MPWG) specifications.
 
Download Datasheet | Product Details
 
Antenna
Ultra-Slim Chip Antenna for GNSS and Cellular Applications

Antenna from Fractus Antennas

The FR01-S4-210 (TRIO mXTEND) from Fractus Antennas is a chip antenna that operates in 698-960 MHz, 1561-1606 MHz, 1710-2690 MHz and 3400-3800 MHz bands for 3G, 4G, 5G and GNSS Applications. It offers the flexibility to be tuned at the frequency regions of interest through the proper adjustment of the matching network.
 
Download Datasheet | Product Details
 
RF Test Set
Multi-DUT Connectivity Test System from 860 to 6000 MHz

RF Test Set from LitePoint

IQxel-M8 is a test box that supports multiple connectivity technologies with banded frequency coverage from 860 to 6000 MHz. This test set can be configured to test up to eight (8) SISO devices in parallel, or up to four (4) devices in a 2x2 MIMO configuration. It provides full Tx/Rx physical layer testing of 802.11 a/b/g/n/j/p/ac, 802.11ah, Bluetooth 1.0-4.2, ZigBee, Z-Wave, WiSUN, LTE-U and DECT/DECT 6.0/CAT-iq.
 
Download Datasheet | Product Details
 
Noise Source
Programmable Gaussian Noise Generator from 10 Hz to 40 GHz

Noise Source from Noisecom

The UFX7000A from Noisecom is a Programmable Gaussian (AWGN) Noise Generator that operates from 10 Hz to 40 GHz. The standard configuration has a broadband noise source and noise path attenuator with a maximum attenuation range of 127 dB in 1 dB steps. It is available in a rack mount unit that measures 17.25 x 6.50 x 19.50 inches with SMA female connectors.
 
Download Datasheet | Product Details
 
Microwave Backhaul Radio Links
Multi Carrier Packet Microwave Solution from 6 to 42 GHz

Microwave Backhaul Radio Links from DragonWave

The Harmony Enhanced MC from DragonWave is a multi-carrier packet microwave solution that operates from 6 to 42 GHz. It achieves high spectral efficiency delivering data rates up to 4 Gbps in a single radio and 8 Gbps in a single channel with MIMO or a single antenna with XPIC. This is microwave radio solution delivers up to 35 dBm of transmit power with a wide channel bandwidth of 112 MHz.
 
Download Datasheet | Product Details
 
Sponsored by Signal Hound
 
 
 
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, new white papers, feature interesting products, keep you up to date with the latest industry events and much more.

To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]