PREV 15th Jan, 2014 NEXT

New RF Attenuator, Coupler, GPS/GNSS Module and Circulator/Isolator this week

Jan 15, 2014 - Newsletter
everything RFJan 15, 2014

There are new RF and Microwave products out this week. Some of them can be seen in this Newsletter. Visit www.everythingRF.com to keep up to date on new products, white papers and news. Use the Parametric Search tool to find products by specification, compare products across companies, download datasheets and request quotations.

Sponsored by Aeroflex / Inmet

Aeroflex - Inmet
New RF & Microwave Products this Week
Digital Attenuator

400 to 6000 MHz, 120 dB, Programmable Digital Attenuators

Digital Attenuator from Vaunix

The LDA-602E Lab Brick® Digital Attenuator with SMA female connectors is a 50 Ohm RF step attenuator which operates from 400 MHz to 6 GHz. It has an attenuation range of 120 dB, an insertion loss of 5.5 to 9.5 dB and can handle up to 1 W of power. The attenuator is powered by the USB slot and does not require an additional DC supply voltage.

Download Datasheet  |  Product Details
 
 
Digital Attenuator

1 to 1000 MHz, 120 dB, Programmable Digital Attenuators

Digital Attenuator from Vaunix

The LDA-102E Lab Brick® Digital Attenuator with SMA female connectors is a 50 Ohm RF step attenuator which operates from 0.1 MHz to 1 GHz. It has an attenuation range of 120 dB, an insertion loss of 5.5 dB and can handle up to 1 W of power. The attenuator is powered by the USB slot and does not require an additional DC supply voltage.

Download Datasheet  |  Product Details
 
 
GPS/GNSS Module

GPS/GNSS Module for the L1 Band with -163 dBm Sensitivity, 1.75-1.9 V Supply

GPS/GNSS Module from Telit Communications

The Jupiter JF2 is a GPS/GNSS Module from Telit that has been designed for the L1 Band at 1575.42 MHz. It requires a 1.75 to 1.9 V supply and has a tracking sensitivity of -163 dBm and consumes 10 mA of current (low power mode), 37 mA (full power mode). The module is based on the SiRF Star IV core GPS Module. It has UART, SPI and I2C interfaces.

Download Datasheet  |  Product Details
 
 
Signal Generator

25 to 6000 MHz, 1 Hz steps, Continuous Wave USB Signal Generator

Signal Generator from Spartant

The RSS-6000 is a continuous wave USB Signal Generator from Spartant that operates from 25 MHz to 6 GHz. It can generate a signal with power that ranges from -27 to 10 dBm that has a phase noise of -106 dBc/Hz @100 kHz @ 250-1000 MHz. This signal generator is extremely compact, about the size of a deck of cards, measuring 0.90” H x 2.82” W x 4.04” D.

Download Datasheet  |  Product Details
 
 

Sponsored by Aeroflex / Inmet

Aeroflex - InmetAttenuate Your Signal Path, Not Your Expectations

A 6 GHz SMA reverse polarity attenuator for your in-building DAS build-out. Check out the new addition to the full line of fixed attenuator products from Aeroflex / Inmet - A solution minded, performance driven, and customer focused global supplier of passive RF and Microwave components to the commercial, military, and laboratory test markets.

Dual Directional Coupler

1 to 6 GHz, 250 W, 40 dB Broadband Dual Directional Coupler

Dual Directional Coupler from TRM Microwave

The DDH 4016 is a High power broadband dual directional coupler that operates from 1 to 6 GHz. It can handle up to 250 W CW power and is designed for use across multiple broadband test applications. The coupler is packaged in a connectorized module with alternate N Type (F/M) and SMA (F/M) connectors.

Download Datasheet  |  Product Details
 
 
Coaxial Circulator

10 W Circulator with SMA Connectors from 1.7 to 2.2 GHz

Coaxial Circulator from Pasternack Enterprises Inc

The PE8414 from Pasternack is a circulator with SMA connectors that operates from 1.7 to 2.2 GHz. It can handle up to 10 W of power and has an isolation of 18 dB. It is ideal for LTE, AWS, PCS and WiMax applications.

Download Datasheet  |  Product Details
 
 
Drop-In Circulator

4.5kW Peak Power L-Band Drop-in Circulator

Drop-In Circulator from Renaissance Electronics Corporation

The 3G3NAG is a L-Band drop-in Circulator that operates from 1 to than can handle up to 4.5 kW of peak power from 1 to 1.12 GHz. It can handle up to 4.5 kW of peak power, has an isolation of 23 dB and a insertion loss of 0.2 dB. The circulator is ideal to duplex an antenna with HPA and a receiver.

Download Datasheet  |  Product Details
 
 
Coaxial Isolator

Isolator with N Type connectors from 1.7 GHz to 2.2 GHz

Coaxial Isolator from Pasternack Enterprises Inc

The PE8417 from Pasternack is an Isolator with N Type connectors that operates from 1.7 to 2.2 GHz. It can handle up to 10 W of power and has an isolation of 18 dB. It is ideal for LTE, AWS, PCS, ISM and WiMax applications.

Download Datasheet  |  Product Details
 
 
Variable Attenuator

1 to 2 GHz, High Power Variable Attenuators

Variable Attenuator from Narda Microwave

The 795 is a high power variable attenuator from Narda Microwave that operates from 1 to 2 GHz. It can handle up to 500 W of average power and up to 10 KW of peak power. The attenuator has an attenuation of 10 dB, has an attenuation of 10 dB and an insertion loss of 0.5 dB. The 795 is available in a connectorized module and is adjustable by micrometer.

Download Datasheet  |  Product Details
 
 
Laminate

Halogen Free Low Loss Laminate and Prepreg System - 3.7 Dk, 0.0045 Df

Laminate from Arlon

MULTICLAD HF is a new halogen-free low-loss system from ARLON that is a low loss thermoset and prepreg for high speed and high frequency printed circuit boards. The new technology combines a low loss high reliability thermoset resin system with non-brominated flame retardant system to create a material that has exceptional electrical performance, durability and is cost effective.

Download Datasheet  |  Product Details
 
 
GaN Transistor

285W GaN RF Power Transistor from DC to 2 GHz

GaN Transistor from Triquint

The TriQuint T1G2028536-FS from Triquint is a Gallium Nitride (GaN) RF power transistor which operates from DC to 2 GHz. It provides 285 W of power(P3dB) with a gain of 18 dB and requires a 36 V supply. This GaN transistor is ideal for military and civilian radar, professional and military radio communications, test instrumentation, GPS communication and avionics.

Download Datasheet  |  Product Details
 
 
Variable Attenuator

7 to 26.5 GHz Broadband Variable Attenuator

Variable Attenuator from Narda Microwave

The 4796 is a broadband variable attenuator that operates from 7 to 26.5 GHz. It has an attenuation range of 15 dB, can handle up to 5 W of average power, 1.4KW of peak power and has a VSWR of 1.7:1. The attenuator is available in a module with 3.5 mm Female connectors and is ideal for communication applications.

Download Datasheet  |  Product Details
 
 
Drop-In Isolator

S band Drop-in Isolator Optimized for Aeronautical Communications and Navigation Systems

Drop-In Isolator from Renaissance Electronics Corporation

The R2H4NNB is a S-Band drop-in isolator that operates from 2.7 to 2.9 GHz to protect amplifier circuits from unwanted reflected power levels. It has an insertion loss of 0.4 dB, isolation of 20 dB and a VSWR of 1.25:1 at the input/output. This low cost, high power, drop-in isolator has been optimized for Aeronautical communications and navigation systems.

Download Datasheet  |  Product Details
 
 
90 Degree Hybrid Coupler

600 to 900 MHz, 3 dB, 90 Degree Hybrid Coupler

90 Degree Hybrid Coupler from Anaren Inc

The X3C07F1-03S is a 90 Degree hybrid coupler from Anaren that operates from 600 to 900 MHz. This surface mount hybrid coupler is ideal for AMPS, GSM, WCDMA and LTE Applications. It can handle up to 25 W of average power, has an insertion loss of under 0.17 dB and Isolation over 23 dB.

Download Datasheet  |  Product Details