PREV 24 Aug, 2020 NEXT

Latest News & White Papers this Week

24 Aug, 2020 - everything RF Newsletter

Top stories this week. View it in your browser

 
Date: 24 Aug, 2020
 
Sponsored by Military PNT Conference
 
 
 
Latest News this Week
Measure Antenna Patterns in Minutes Without Using Anechoic Chamber - MegiQ
Skylo Partners with Sony Semiconductor Israel to Deploy 5G-Ready NB-IoT Connectivity over Satellite - Altair Semiconductor
Silvus Develops Secure Observable Communications Waveform Developed for the US Army - Silvus
Researchers Successfully Reduce the Size of GHz Filters by 10x - Illinois
Sierra Wireless Introduces 5G NR Sub-6 GHz and mm-Wave Embedded Modules - Sierra Wireless
CEVA Introduces the First CERTIFIED Wi-Fi 6 IP Platform for Licensing - CEVA
FAW Selects Keysight’s Connected Car Test Solutions for In-Vehicle and V2V Communications - Keysight Technologies
Giga-tronics Introduces Wide-Band RF Playback Solution for Radar and EW Applications - Giga-tronics
Bird Introduces Cable and Antenna Analyzer for the Aviation Industry - Bird
Copper Mountain Technologies Announces Power Calibration Integration with LadyBug Technologies - LadyBug Technologies
Advanced Rigid Substrate Material for High Frequency Chip Packaging - DYCONEX AG
More News
New White Papers & Articles
Measurements on Devices with Very High Noise Figure - Rohde & Schwarz
5G Indoor White Paper - ZTE
An Adaptable Direct RF-Sampling Solution - Xilinx
Measurement of Electronic Component Impedance Using a Vector Network Analyzer - Copper Mountain Technologies
Thermal Management in High Performance RF and Microwave PCBs - Teledyne Labtech
More White Papers
Upcoming Event
Event Image
IWCE 2020 Virtual
Date: 24 to 28 August, 2020
Location: Virtual
More Events
Featured Interview
Andrey Kishchinsky
Interview with Andrey Kishchinsky from Microwave Systems
everything RF recently interviewed Andrey Kishchinsky, the R&D Director at Microwave Systems JSC. Microwave Systems JSC is based in Moscow, Russia and develops various types of broadband high-power microwave amplifiers including powerful pulse amplifiers and transceiver modules for phased array antenna based systems. Click here to read the full Interview.
 
Featured Products this Week
Tunable Filter
5-Bit Digitally Tunable Bandpass Filter from 630 to 1400 MHz

Tunable Filter  from Fraunhofer

The TBPF-630-1400 from Fraunhofer is a Digitally Tunable Bandpass Filter with a tunable center frequency from 630 to 1400 MHz and a 1 dB bandwidth from 10.5 to 19.5%. This lumped-element tunable preselection bandpass consists of three coupled resonators. It uses a digitally tunable capacitor and allows for tuning the center frequency with a resolution of 5 bits.
Download Datasheet | Product Details
Tunable Filter
200 to 2500 MHz Digitally Tuned RF Filter

Tunable Filter  from NuWaves Engineering

The RF200-2500TUNV1 (HiPerTuner) from NuWaves is a Digitally Tuned RF Filter/Pre-Selector that operates from 200 to 2500 MHz. The frequency and gain of the pre-selector can be controlled via a simple RS-232 interface. The filter has a 1 MHz center frequency tuning resolution and 45 dB of gain control with 1 dB steps. Bandwidths are typically between 4% and 8%.
Download Datasheet | Product Details
Frequency Synthesizer
450 MHz to 18.25 GHz Synthesizer with 10 MHz steps

Frequency Synthesizer  from Cobham Signal & Control Solutions

The 435-36105 from Cobham is a Frequency Synthesizer that operates from 450 MHz to 18.25 GHz with 10 MHz steps. This device provides a switching speed of 250 µs from any start frequency to any stop frequency in the full range and has a parallel control interface to facilitate pipelined hopping. The spurious content is -55 dBc from 450 MHz to 12 GHz and -50 dBc from 12 to 18.25 GHz.
Download Datasheet | Product Details
RF Mixer
30 MHz to 6 GHz Programmable Frequency Converter and Signal Generator

RF Mixer  from Othernet

moRFeus is a programmable Fractional-N wideband frequency converter (mixer) and signal generator that operates from 30 MHz to 6 GHz. It has an LCD Display and button interface that provide a dynamic way to program the mixer LO frequency in the field with a step size of 1.5 to 3 Hz. The ability to toggle between the mixer and generator modes can easily be done using buttons on the device.
Download Datasheet | Product Details
Laminate
Ceramic Filled, Woven Glass Reinforced Laminates for 5G and mmWave Applications

Laminate  from Rogers Corporation

The CLTE-MW from Rogers Corporation are ceramic filled, woven glass reinforced PTFE composites for 5G and Millimeter-Wave Applications up to 40 GHz. These laminates are reinforced with spread glass, which minimizes the high-frequency glass weave effects on electromagnetic wave propagation. Their woven glass reinforcement also provides excellent dimensional stability.
Download Datasheet | Product Details
Bias Tee
Bias Tee from 30 kHz to 40 GHz

Bias Tee  from Pulsar Microwave

The BT-50-400S from Pulsar Microwave is a Bias Tee that operates from 30 kHz to 40 GHz. The COTS device has an insertion loss of less than 3 dB and provides an isolation of more than 40 dB. It supports a DC supply voltage of 25 V (max) and up to 500 mA of current. It can handle up to 1 W of input power and has a VSWR of less than 1.8:1.
Download Datasheet | Product Details
RF Variable Attenuator
10-Bit Programmable Attenuator from 18 to 40 GHz

RF Variable Attenuator  from Pasternack Enterprises Inc

The PE70A6001 from Pasternack Enterprises is a 10-bit Programmable Attenuator that operates from 18 to 40 GHz. This pin diode attenuator provides an attenuation from 0 to 30 dB with a step resolution of 0.03 dB and has a P1dB of 10 dBm. It has an insertion loss of 6 dB and a VSWR of less than 2.5:1.
Download Datasheet | Product Details
RF Amplifier
GaAs MMIC Driver Amplifier from 2.7 to 4 GHz

RF Amplifier  from arQana Technologies

The ADA4200-QA from Arqana Tech is a GaAs MMIC Driver Amplifier that operates from 2.7 to 4 GHz. It provides a saturated output power of 33 dBm (P1dB of 31 dBm) with a gain of over 24 dB and PAE of 25%. This pHEMT amplifier requires a DC supply voltage of 20 V and draws 2.94 A of current. It includes a 13 dB variable attenuator at the input and a resistively coupled power detector at the output.
Download Datasheet | Product Details
RF Amplifier
Doherty Power Amplifier Module from 3.4 to 3.6 GHz for TDD and FDD LTE Systems

RF Amplifier  from NXP Semiconductors

The AFSC5G35D35 from NXP is a Doherty Power Amplifier that operates from 3.4 to 3.6 GHz. It provides an output power of 3 watts with a gain of 25.3 dB while operating from a 24 V DC supply. This field-proven LDMOS power amplifier is designed for TDD and FDD LTE systems. The amplifier is available in a 10 x 6 mm surface-mount package.
Download Datasheet | Product Details
RF Amplifier
Bi-Directional Amplifier from 4000 to 6000 MHz

RF Amplifier  from Triad RF Systems

The TTRM1191 from Triad RF Systems is a Bi-Directional Amplifier that operates from 4000 to 6000 MHz. On the Tx side, it provides a P1dB of 37 dBm with a gain of over 15 dB. On the Rx side, it has a P1dB of 5 dBm and a gain of over 10 dB. This class A amplifier requires a DC voltage from 9 to 32 V and consumes 2 A of current.
Download Datasheet | Product Details
RF Switch
Non-Reflective SP4T Switch from DC to 20 GHz

RF Switch  from Custom MMIC

The CMD302C4 from Custom MMIC is a Non-Reflective SP4T Switch that operates from DC to 20 GHz. It has an insertion loss of less than 3.6 dB and an isolation of over 22 dB. The device can handle up to 27 dBm of input power and operates using complementary control voltage logic lines of 0/-5 V. It includes an on-board binary decoder circuit which reduces the number of required logic control lines from four to two.
Download Datasheet | Product Details
RF Amplifier
100 W Power Amplifier from 700 to 6000 MHz for EMC Testing

RF Amplifier  from Com-Power Corporation

The ARI-6000-100W from Com-Power Corporation is a Power Amplifier that operates from 700 to 6000 MHz. It provides a saturated output power of 100 W with a gain of more than 53 dB. The amplifier can handle up to +3 dBm of input power and supports CW/AM/FM/PM/Pulse RF input signal formats. The amplifier is available in a cabinet that measures 22 x 48.3 x 62.2 cm with N-type (F) connectors.
Download Datasheet | Product Details
Block Up Converter
Ku-Band BUC for VSAT and SATCOM Applications

Block Up Converter  from Genmix Technology

The GMU137145B09 from Genmix Technology is a Ku-Band BUC that up-converts an input frequency from 950-1700 MHz to an RF frequency from 13.75-14.5 GHz. This BUC delivers an output power of 2 W (P1dB of 33 dBm) with a gain of over 55 dB. It requires a DC supply voltage from 15 to 24 V and consumes 18 watts of power while operating.
Download Datasheet | Product Details
Vector Network Analyzer
2-Port Vector Network Analyzer from 70 kHz to 220 GHz

Vector Network Analyzer  from Anritsu

The ME7838G from Anritsu is a 2-Port Vector Network Analyzer System that operates from 70 kHz to 220 GHz in a single sweep. The VNA provides high performance in a compact mm-Wave module utilizing Anritsu’s Nonlinear Transmission Line (NLTL) technology. It has an innovative design that allows the 220 GHz probe to connect directly to the mm-Wave module for accurate, stable on-wafer measurements.
Download Datasheet | Product Details
RF Test Set
LTE, WCDMA and GSM Conformance Testing Solution

RF Test Set  from Rohde & Schwarz

The Rohde & Schwarz TS8980 is an integrated test system for LTE, WCDMA, and GSM conformance testing. It is a family of test solutions for the entire development lifecycle of mobile stations (MS) and has special optional add-ons to meet specific operator needs. This family includes TS8980FTA-2, TS8980S-2, and TS8980PRE test systems.
Download Datasheet | Product Details
GNSS Module
GNSS Receiver for Navigation Systems, Telematics and Marine/Avionics Navigation

GNSS Module  from Maxim Integrated

The MAX2769C from Maxim is a GNSS receiver for GPS (L1/E1, B1, G1 bands), Galileo, BeiDou, and GLONASS satellite systems. The chip consists of the complete receiver chain, including a dual-input LNA and mixer, followed by the image-rejection filter, Programmable Gain Amplifier (PGA), and a multi-bit ADC. It provides 110 dB of cascaded gain with a total cascaded noise figure of 1.4 dB.
Download Datasheet | Product Details
Power Divider
4 Way Wilkinson Power Divider from 24 to 32 GHz

Power Divider  from Knowles

The PDW07069 from Knowles is a 4-Way Wilkinson Power Divider that operates from 24 to 32 GHz. This power divider has an insertion loss of less than 1 dB and provides more than 14 dB of isolation. It has an amplitude balance of ± 0.5 dB and a phase balance of ± 6.0 degrees. It is available in a surface-mount package that measures 4.32 x 3.56 x 0.25 mm.
Download Datasheet | Product Details
Cellular Module
LTE Cat M1/NB2 Modules for IoT Applications

Cellular Module  from Telit Communications

The ME910G1 Series from Telit are Cat M1/NB2 devices that have been specifically developed for low data throughput IoT applications. They have a maximum downlink rate of up to 365 Kbps and uplink data rate of 1 Mbps. These LTE UE Cat M1/NB2 solutions support new features specified by 3GPP in Release 14 to boost IoT applications.
Download Datasheet | Product Details
Antenna
Flexible Embedded Multiband LTE-M and NB-IoT Antenna

Antenna  from Linx Technologies

The ANT-LPC-FPC-100 from Linx Technologies is a Flexible Embedded Multiband Cellular and Cellular IoT (LTE-M and NB-IoT) Antenna for use in LTE applications such as Citizens Broadband Radio Service (CBRS). It also supports low-power, wide-area (LPWA) networking at 868 MHz, 915 MHz, and global navigation systems (GNSS/GPS).
Download Datasheet | Product Details
Sponsored by Military PNT Conference
 
 
 
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, articles, white papers, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]