PREV 26 Aug, 2020 NEXT

New RF and Microwave Products this Week

26 Aug, 2020 - everything RF Newsletter

New products this week. View it in your browser

 
Date: 26 Aug, 2020
 
Sponsored by Mouser
 
 
 
New RF and Microwave Products this Week
Vector Network Analyzer
2 Port USB-controlled VNA from 300 kHz to 8.5 GHz

Vector Network Analyzer  from Pico Technology

The PicoVNA 108 from Pico Technology is a 2 Port USB-controlled, low cost, laboratory-grade Vector Network Analyzer that operates from 300 kHz to 8.5 GHz. It delivers an exceptional dynamic range of 124 dB and offers dual-frequency mixer measurements with VSWR correction. The VNA can gather all four S-parameters at each frequency point in just 189 µs or S11 + S21 in less than 100 µs.
Download Datasheet | Product Details
Beamforming IC
28 GHz Beamforming Front End IC for 5G Phased Array Antenna Systems

Beamforming IC  from MixComm

The SUMMIT2629 from Mixcomm is an 8-Channel Beamforming Front End IC that operates from 26.5 to 29.5 GHz. The IC extends link range to decrease infrastructure costs and improves customer satisfaction, reducing power consumption and thermal dissipation, while reducing antenna array complexity and the overall RF front-end cost. It integrates power amplifiers (PA), low noise amplifiers, T/R switching, beamformers and other core functionality.
Download Datasheet | Product Details
Directional Coupler
30 dB Directional Coupler from 2 to 18 GHz

Directional Coupler  from Werbel Microwave

The C-1182-30 from Werbel Microwave is a Directional Coupler that operates from 2 to 18 GHz. It has a coupling factor of 30 dB, an insertion loss of 0.6 dB and directivity of 17 dB. The device can handle up to 50 W of average and 3 kW of peak input power. It has a frequency sensitivity of ± 0.55 dB, a VSWR of 1.25:1, and an excellent return loss.
Download Datasheet | Product Details
Termination
1 W SMT Chip Terminations from DC to 67 GHz

Termination  from Smiths Interconnect

The CTX SMT Series from Smiths Interconnect are SMT Chip Terminations that operate from DC to 67 GHz. They can handle up to 1 watt of CW power with a VSWR of less than 1.5:1. The terminations are available in a small 0603 package and are manufactured using thin-film technology and tested per MIL-PRF-55342 to ensure long term Hi-Reliability.
Download Datasheet | Product Details
SATCOM Amplifier System
1000 W C-Band SSPA from 5.85 to 7.025 GHz for SATCOM

SATCOM Amplifier System  from Advantech Wireless Technologies

The C-Band 8 Module SUMMIT II from Advantech Wireless is a High-Power, Solid State Power Amplifier that operates from 5.85 to 7.025 GHz. The amplifier system is available in two saturated output power variants: 800 W (59 dBm) and 1000 W (60 dBm). It provides a linear gain of more than 70 dB, has a user-adjustable gain of up to 20 dB with a step size of 0.5 dB, and gain stability of ±1.5 dB.
Download Datasheet | Product Details
Frequency Synthesizer
2-Channel Low Phase Noise Synthesizer from 0.01 to 20 GHz

Frequency Synthesizer  from AnaPico

The APSYN420-2 from AnaPico is a 2-Channel Low Phase Noise Synthesizer that operates from 0.01 to 20 GHz with a frequency resolution of 0.001 Hz. This dual-output phase-synchronous synthesizer delivers an output power of 23 dBm per output whose frequency can be independently programmed. The two independent synthesizers are operated from a single internal reference to maximize the phase coherence between the two outputs. It has a settling time of up to 100 µs and an SSB phase noise of -98 dBc/Hz at 1 kHz from the carrier.
Download Datasheet | Product Details
Signal Generator
10 MHz to 40 GHz Phase Coherent, Multi-Channel RF Synthesizers

Signal Generator  from Holzworth Instrumentation

The HSX Series from Holzworth Instrumentation are broadband, phase-coherent frequency sources that are available in five frequency configurations from 10 MHz to 3 GHz, 6 GHz, 12 GHz, 24 GHz, and 40 GHz. They have industry-leading phase noise and spectral purity performance coupled with a highly accurate dynamic range from -110 to 20 dBm. They are available in 1, 2, 3, or 4 channel Custom COTS models.
Download Datasheet | Product Details
Sponsored by Mouser
Xilinx Zynq UltraScale RFSoC
Characterize and evaluate the Zynq UltraScale+ XCZU29DR-2FFVF1760E RFSoC
Xilinx Zynq UltraScale+ RFSoC ZCU1275 Characterization Kit features integrated ADCs and DACs, as well as GTY, GTR transceivers. All 16 12-bit 2GSPS ADCs, all 16 14-bit 6.4GSPS DACs, all 16 GTY transceivers, and all 4 GTR transceivers are accessible through Samtec BullsEye® connectors. Click here to learn more.
 
Power Sensor
Real-Time True Average Power Sensors from 4 kHz to 6 GHz

Power Sensor  from Boonton

The RTP4000 Series from Boonton are Real-Time True Average Power Sensors that operate from 4/10 kHz to 6 GHz. They have a dynamic range from -60 to +20 dBm and a video bandwidth of 175 kHz for pulse profiling. These sensors support Pulse, Average, CW, and other Modulation modes. The RTP4000 average power sensors are ideal for fast, accurate, and reliable RF power measurements.
Download Datasheet | Product Details
RF Shielded Test Enclosure
RF Shielded Test Enclosure from 20 MHz to 6 GHz

RF Shielded Test Enclosure  from RF Electronics

The HDRF-20U60-A1 from RF Electronics is an RF Shielded Test Enclosure that operates from 20 MHz to 6 GHz. It has a thick RF absorbing foam that provides an isolation of over 95 dB. The device has shielded power filters which can be used to power devices placed inside the enclosure while blocking all wireless signals.
Download Datasheet | Product Details
RF Amplifier
25 W GaN MMIC Power Amplifier from DC to 6 GHz

RF Amplifier  from Wolfspeed, A Cree Company

The CMPA0060025F1 from Wolfspeed is a GaN MMIC Power Amplifier that operates from DC to 6 GHz. The amplifier delivers up to 25W of saturated output power with a small signal gain of 17 dB and a Power Added Efficiency of more than 20%. It requires a DC Supply of 50V and is fabricated using a GaN HEMT technology.
Download Datasheet | Product Details
RF Variable Attenuator
Ethernet Controlled Variable Attenuator Assembly from 200 to 8000 MHz

RF Variable Attenuator  from JFW Industries

The 50PA-1174-XX from JFW Industries is a Programmable, Solid-State, Bi-Directional Variable Attenuator assembly that operates from 200 to 8000 MHz. Assemblies are available with multiple attenuators ranging from 1 to 8 (user can specify the number of attenuators required). Each attenuator provides an attenuation range from 0 to 63 dB in 0.5 dB steps, has an insertion loss of less than 5.3 dB, and a switching speed of 1 microsecond.
Download Datasheet | Product Details
Tunable Filter
Tunable SMT Filter from 470 to 870 MHz

Tunable Filter  from Netcom

The 5676 from Netcom is a Single Band Tunable Filter with a passband from 470 to 870 MHz (10% bandwidth) and a tuning resolution of 1 MHz. The filter has an insertion loss of 4.6 dB and a tuning speed of less than 35 µs. It can handle up to 33 dBm of input power and requires a DC power supply of 3.3 volts. This filter is available in a surface-mount package that measures 0.575 x 0.575 x 0.280 inches with a serial input control interface.
Download Datasheet | Product Details
RF Cable Assembly
VNA Cable Assemblies from DC to 50 GHz

RF Cable Assembly  from Maury Microwave

The Stability VNA Cable Assemblies from Maury Microwave are Test Port Cable Assemblies that operate from DC to 50 GHz. The cables have a shielding effectiveness of over 100 dB from DC to 18 GHz and a VSWR of less than 1.35:1. They have an insertion loss of less than 4.9 dB, a propagation velocity of 74%, and a time delay of 1.34 ns/ft.
Download Datasheet | Product Details
Wireless SoC
2.4/5 GHz Dual-Band 4x4 Wi-Fi® 6 (802.11ax) SoC

Wireless SoC  from NXP Semiconductors

The 88W9064 from NXP is a 2.4/5 GHz Dual-Band 4x4 Wi-Fi® 6 (802.11ax) SoC. It has integrated MU-MIMO and OFDMA solutions that help increase capacity for downlink and uplink traffic to allow for overall improved network utilization while meeting the growing demands of user applications. Other features of the 88W9064 family include integrated Bluetooth 5.0 and a precision device location function.
Download Datasheet | Product Details
Sponsored by Mouser
 
 
 
RF Module
868 MHz LoRa Module for IoT and Building Automation

RF Module  from IMST

The iM880B-L from IMST is a Bi-Directional LoRa Module designed for the unlicensed 868 MHz band. Based on Semtech's ultra-long-range transceiver SX1272, it provides an output power of up to 19 dBm and has a receiver sensitivity of -138 dBm (SF 12: SB 125 kHz, CR 4/6). It offers an RF data rate from 0.24 to 37.5 kbps and has a LOS (Line of Sight) range up to 15 km.
Download Datasheet | Product Details
RF Amplifier
100 W Solid-State Power Amplifier from 6 to 18 GHz

RF Amplifier  from Exodus Advanced Communications

The AMP2033LC from Exodus Advanced Communications is a Solid-State Power Amplifier that operates from 6 to 18 GHz. It delivers 100 W of saturated output power (P1dB of 50 W) with a gain of more than 50 dB. This class A/AB amplifier exhibits 2-tone intermodulation (IMD) of -30 dBc, spurious of -60 dBc, and harmonics of -20 dBc.
Download Datasheet | Product Details
RF Amplifier
10 W Solid State Amplifier from 200 MHz to 2.6 GHz

RF Amplifier  from NuWaves Engineering

The NW-PA-11B02A from NuWaves Engineering is a solid-state power amplifier that operates from 200 MHz to 2.6 GHz. It delivers an output power of 10 W with a gain of 38.5 dB and has a switching speed of less than 30 microseconds. This amplifier requires a supply voltage from 11 to 32 VDC and consumes under 1.8 A of current.
Download Datasheet | Product Details
RF Amplifier
10 W Power Amplifier from 5050 to 5250 MHz

RF Amplifier  from RFcore

The RCA5053H40D1 from RFcore is a High Power Amplifier that operates from 5050 to 5250 MHz. The amplifier provides a saturated output power of more than 10 watts with a gain of over 40 dB. It operates over a DC supply voltage from 26 to 30 V and consumes less than 2 Amps of current. This RF amplifier is available in a module that measures 110 x 90 x 25 mm with SMA (F) connectors.
Download Datasheet | Product Details
RF Switch
Reflective SPDT Switch from 6 to 18 GHz

RF Switch  from Planar Monolithics Industries

The P2T-6G18G-40-R-570-TFF-50WCW from PMI RF is a reflective SPDT switch that operates from 6 to 18 GHz. This switch has an insertion loss of 2.2 dB, isolation of 40 dB, and can handle up to 50 Watts of CW power. It has a VSWR of 2:1 and a switching speed of 1.1 usec. The switch has a Single TTL control interface and requires a 5 V/-70V Supply.
Download Datasheet | Product Details
RF Amplifier
Low Noise Amplifier from 0.1 to 8 GHz

RF Amplifier  from AmpliTech

The AWLN-28-00100800-2010-D4 from Amplitech is a Low Noise Amplifier that operates from 0.1 to 8 GHz. It provides over 28 dB of gain with a noise figure of less than 1.2 dB and has a P1dB of 10 dBm. This LNA is built using state-of-the-art pHEMT technology and requires a DC supply of +15 V. It is available in a module with SMA-female connectors.
Download Datasheet | Product Details
Antenna
3-in-1 GNSS and 4G MIMO Adhesive Mount Antenna

Antenna  from Taoglas

The MA256 from Taoglas is a 3-in-1 Adhesive Mount Combination Antenna for 4G MIMO and GPS/GLONASS/BeiDou/Galileo applications. This low-profile antenna has been designed to be mounted directly onto glass or plastic and can even be mounted internally in vehicles, via high quality, first-tier automotive approved 3M adhesive.
Download Datasheet | Product Details
Base Station Antenna
Dual Polarized Panel Antenna from 4000 to 5875 MHz

Base Station Antenna  from Hascall-Denke

The FXSP4.0-5.875-16-D from Hascall-Denke is a Dual Polarized Panel Antenna that operates from 4000 to 5875 MHz. The antenna has been developed for both indoor and outdoor applications. It delivers a gain of 16 dBi and can handle 30 watts of input power. This antenna is designed to support extremely high volume data rates, equal bit data streams, and low BER applications.
Download Datasheet | Product Details
OCXO
Low Phase Noise OCXO with 10 and 100 MHz Output Signals

OCXO  from KVG Quartz Crystal Technology GmbH

The DUO-30-10M-100M from KVG Quartz Crystal Technology is an OCXO module with 10 and 100 MHz output frequencies. It has a frequency stability of less than ± 100 ppb and a phase noise of -178 dBc/Hz @ 1 MHz offset. This device provides a sine wave output and has a warm-up time of less than 5 minutes. It requires a supply voltage of +5 V and has a frequency control voltage from 0 to +5 V.
Download Datasheet | Product Details
Clock Oscillator
Rugged SMD Clock Oscillator from 2 to 60 MHz

Clock Oscillator  from Euroquartz Ltd

The EQXO-75UIE from Euroquartz is a High-Temperature Clock Oscillator that operates from 2 to 60 MHz. It has a duty cycle of 50% (±5%) and provides an LVCMOS output logic. The device requires a 2.5 V, 3.3 V or 5 V supply voltage and consumes up to 16 mA of current. It has a start-up time of less than 3 ms and a rise/fall time of less than 10 ns.
Download Datasheet | Product Details
Power Divider
40 W Power Divider/Combiner from 698 to 2700 MHz

Power Divider  from MECA

The 809-2-1.700V from MECA is a 9-Way Power Divider/Combiner that operates from 698 to 2700 MHz. It can handle up to 40 W of input power, has an insertion loss of less than 1.6 dB, and provides isolation of more than 17 dB. The device has an amplitude balance of 0.4 dB and a phase balance of 12 degrees. It is available in a module that measures 9.0 x 5.50 x 0.75 inches with SMA-female connectors.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest industry news, information on new product releases, upcoming events, white papers, articles and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]