PREV 2 Sept, 2020 NEXT

New RF and Microwave Products this Week

2 Sept, 2020 - everything RF Newsletter

New products this week. View it in your browser

 
Date: 2 Sept, 2020
 
Sponsored by Mini Circuit
 
 
 
New RF and Microwave Products this Week
RF Amplifier
High Linearity InGaP Power Amplifier from 700 to 800 MHz

RF Amplifier  from Guerrilla RF

The GRF5507 from Guerilla RF is a Two-Stage InGaP HBT Power Amplifier that operates from 700 to 800 MHz. It provides a P1dB of 33.4 dBm with a small signal gain of 30.5 dB and a typical noise figure of 4.5 dB. The amplifier maintains +24 dBm of linear output power at 85°C with an ACLR of more than 45 dBc.
Download Datasheet | Product Details
OCXO
Low Phase Noise OCXO from 5 to 130 MHz

OCXO  from Bliley Technologies

The Poseidon Series from Bliley Technologies are OCXOs that operate from 5 to 130 MHz with frequency stability of ±50, ±100, or ±250 ppb. They provide a sine wave output and have a phase noise of -165 dBc/Hz at 100 kHz offset. The oscillators require a DC supply voltage of 12/15 V and have a warm-up time of less than 5 minutes.
Download Datasheet | Product Details
Balun
Automotive Grade Balun from 50 to 1000 MHz

Balun  from TDK

The ATB2012V-75011-T01 from TDK is an Automotive Grade Balun that operates from 50 to 1000 MHz. It has an insertion loss of less than 1.2 dB and an impedance ratio of 1:1. This AEC-Q200 and RoHS-compliant balun is available in a package that measures 2(L) x 1.2(W) x 1.2(T)mm and is ideal for use in in-vehicle TV and mobile device tuners (DVB-T/H, ISDB-T, etc.) and STB / tuner power dividers.
Download Datasheet | Product Details
Band Pass Filter
Bandpass Filter from 37 to 40 GHz for 5G Applications

Band Pass Filter  from Knowles

The B385MD0S from Knowles is a Bandpass Filter with a passband from 37 to 40 GHz. It has an insertion of 2.5 dB with an attenuation of 40 dB from DC to 34 GHz and 45 to 50 GHz. The filter uses Knowles’s low loss temperature stable materials which allow for its small size and minimal performance variation over temperature.
Download Datasheet | Product Details
Tunable Filter
Electronically Tunable Bandpass Filter from 225 to 400 MHz

Tunable Filter  from NewEdge Signal Solutions

The SAX280 from NewEdge Signal Solutions is an Electronically Tunable Bandpass Filter that operates from 225 to 400 MHz with a step size of 2 MHz. It has an insertion loss of less than 4.8 dB and can handle up to 27 dBm of power. The device offers a rejection of 15 dB at +/- 10% Fc and consumes less than 100 mW of power.
Download Datasheet | Product Details
RF Amplifier
200/300/500 W TWT Amplifiers from 6 to 18 GHz

RF Amplifier  from AMETEK CTS

The GT186 Series from Ametek CTS is a TWT Amplifier Series consisting of 3 amplifiers that operate from 6 to 18 GHz. They provide 200/300/500 W of output power with a gain of more than 53 dB and have a standard duty cycle of 6%. The amplifiers can handle up to 10 dBm of input power, have a pulse width range from 100 ns to CW, a rise/fall time of less than 45 ns, and spurious levels of -50 dBc.
Download Datasheet | Product Details
Sponsored by Mini Circuit
Mini Circuit
Low Cost MMIC Splitters Cover 12 to 43.5 GHz
Mini-Circuits’ EP2-5G1+ MMIC 2-way splitter/combiner covers the entire 12 to 43.5 GHz range, supporting high-performance applications from 5G to phased array radar and more. This model provides 1.3 dB insertion loss, 24 dB isolation, and low unbalance (0.1 dB /4° typ.). It can handle up to 0.5W RF power as a splitter or combiner and comes in a 2x2mm QFN package. Click here to learn more.
 
RF Amplifier
100 W Microwave Power Module from 6 to 18 GHz

RF Amplifier  from TMD

The PTXM9754 from TMD Technologies is a Microwave Power Module (MPM) that operates from 6 to 18 GHz. It has an integrated Travelling Wave Tube (TWT), a solid-state preamplifier, and an optimized high-density switch mode power supply to produce a single "drop-in" microwave amplifier block. It delivers a saturated output power of 100 W with a small signal gain of over 58 dB.
Download Datasheet | Product Details
RF Amplifier
6000 W Solid-State Power Amplifier from 80 to 1000 MHz

RF Amplifier  from AR RF/Microwave Instrumentation

The 6000W1000 from AR RF/Microwave Instrumentation is a Solid-State Power Amplifier that operates from 80 to 1000 MHz. This self-contained, air-cooled amplifier, when used with an RF sweep generator, provides more than 6000 watts of power with a gain of over 67.8 dB. It has a Digital Control Panel (DCP) from where the gain and power level can be controlled.
Download Datasheet | Product Details
RF & Microwave Isolator
Coaxial Isolators from 10 MHz to 26.5 GHz

RF & Microwave Isolator  from UIY Inc.

The coaxial isolators from UIY operate from 10 MHz to 26.5 GHz. They have an insertion loss of less than 1.5 dB, isolation of over 14 dB, and can handle up to 500 watts of forward power. These isolators are available in a module with N-type and SMA connectors as standard products and can also be ordered as a custom module. They are suitable for Military, Space & Commercial applications.
Download Datasheet | Product Details
RF Variable Attenuator
Dual Concentric Rotary Attenuator from DC to 3600 MHz

RF Variable Attenuator  from JFW Industries

The 50DR-141 Dual Concentric Rotary Attenuator from JFW Industries operates from DC to 3600 MHz. It has an attenuation range of 40 dB with a 1 dB step size and an accuracy of 0.5 dB. This attenuator can handle up to 2 watts of average power and 1000 watts of peak power. It is available as a module with N or SMA connectors.
Download Datasheet | Product Details
RF Spectrum Recording and Playback System
Portable Monitoring Receiver and RF Recorder from 9 kHz to 18 GHz

RF Spectrum Recording and Playback System  from IZT

The R3301 from IZT is a Portable Receiver with an integrated RF recorder that operates from 9 kHz to 3 GHz. The receiver is optimized for the recording of RF signals in frequently changing environments. It has a built-in sensor controller for running software applications and storing signal data and is optimized for recording RF signals in mobile and portable applications.
Download Datasheet | Product Details
Power Sensor
RF Power Sensor from 100 MHz to 1.3 GHz

Power Sensor  from Bird

The 5017D-AV from Bird is an RF Power Sensor that operates from 100 MHz to 1.3 GHz and never requires field calibration i.e. only requires calibration once per year and is traceable to the National Institute of Standards and Technology (NIST). It has a power measurement range from 500 mW to 500 W (average) and 1300 W (peak).
Download Datasheet | Product Details
Sponsored by Mini Circuit
 
 
 
RF Amplifier
300 W Solid-State GaN Power Amplifier from 2 to 8 GHz

RF Amplifier  from Exodus Advanced Communications

The AMP2085D from Exodus Advanced Communications is a GaN Solid-State Power Amplifier that operates from 2 to 8 GHz. This Class A/AB amplifier delivers over 300 W of saturated output power (P1dB of 150 W) with a gain of more than 55 dB. The amplifier has 2-tone intermodulation (IMD) of -30 dBc, spurious of -60 dBc and harmonics of under -20 dBc.
Download Datasheet | Product Details
Microwave Generator
30 KW Solid-State Microwave Generator from 1295 to 1305 MHz

Microwave Generator  from RFHIC

The RIK1330K-40T from RFHIC is a GaN SSPA based Microwave Generator that operates from 1295 to 1305 MHz. This generator uses GaN on SiC HEMT technology to provide an adjustable power up to 30 kW with an efficiency of 53%. This microwave generator is suitable for use in high-power systems, particle accelerators, LINAC, industrial heating and drying, high-power medical equipment, CW, pulse and linear applications.
Download Datasheet | Product Details
RF Cable
Ultra-Flexible Test Cables from 0.3 to 32 GHz

RF Cable  from MegaPhase

The Killer Bee from MegaPhase are Ultra Flexible Test Cables that operate from 0.3 to 32 GHz. These cables have a shielding effectiveness of -110 dB and a VSWR of less than 1.40:1. They have a propagation velocity of 86.5%, a time delay of 3.84 ns/m, and a capacitance of 80.4 pF/m. They are available in lengths of up to 20 ft with a crush resistance of 44.6 kg/linear cm.
Download Datasheet | Product Details
DLVA
Successive Detection Log Video Amplifier from 2 to 18 GHz

DLVA  from Planar Monolithics Industries

The SDLVA-218-75-16MV-12DBM from Planar Monolithics Industries is a Successive Detection Log Video Amplifier (SDLVA) that operates from 2 to 18 GHz. The device has been designed by using cutting edge GaAs technology, which provides good performance and reliability across the entire bandwidth. It has a dynamic range of 75 dB, a log slope of -16 mV/dB, and a log range from -60 to +15 dBm.
Download Datasheet | Product Details
Cellular Module
LTE Cat 1 Module with 3G Fallback for Europe

Cellular Module  from u-blox AG

The LARA-R281 from u-blox is an LTE Cat 1 Module with 3G fallback connectivity for operation in Europe (EMEA). It supports the LTE bands (1, 3, 8, 20 & 28) used by the European MNOs for LTE services and also operates in the 2100 MHz band (GSM mode). The module supports Voice over LTE (VoLTE) or CSFB voice service for applications such as security and surveillance systems.
Download Datasheet | Product Details
RF Switch
High Power Reflective SP4T Switch from 30 to 1200 MHz

RF Switch  from Tagore Technology

The TS7541L from Tagore Technology is a Reflective SP4T Switch that operates from 30 to 1200 MHz. It can handle up to 46 dBm of input power, has an insertion loss of less than 0.5 dB, and provides isolation of up to 43 dB. It has a switching speed of 2 us. The switch requires a supply voltage of 2.6 to 5.5 V, consumes up to 200 mA of current.
Download Datasheet | Product Details
PLDRO
Phase-Locked Dielectric Resonator Oscillator (PLDRO) from 5 to 13 GHz

PLDRO  from Polaris

The FPLDRO-R from Polaris is a Phase Locked Dielectric Resonator Oscillator (PLDRO) that can generate any frequency in 10 kHz steps from 5 to 13 GHz. It delivers an output power of 17 dBm and has a phase noise of -120 dBc/Hz @100 kHz at 10 GHz. The device requires a DC supply voltage of 12 or 15 V and consumes up to 550 mA of current.
Download Datasheet | Product Details
Band Pass Filter
Cavity Bandpass Filter from 1616 to 1626.5 MHz for Iridium Satellites

Band Pass Filter  from Reactel

The 6CX9-1621.25-X10.5T11 from Reactel is a Cavity Bandpass Filter for the Iridium Satellite system. This airborne BPF has a passband from 1616 to 1626.5 MHz and a center frequency (Fc) of 1621.25 MHz. It has an insertion loss of less than 2.8 dB in the passband and provides attenuation of over 25 dB at 1614 and 1628 MHz.
Download Datasheet | Product Details
RFID Tag
Flexible NFC and HF RFID Label for Metallic Assets

RFID Tag  from Confidex Ltd

The Steelwave HF from Confidex Ltd is a Flexible NFC and HF RFID Label that operates at 13.15 MHz. It is based on NXP NTAG213 and NXP ICODE SLIX2 ICs. The label has a read range of up to 15 mm with NTAG213 and up to 25 mm with SLIX2. It has a user-programmable memory of 144 bytes with NTAG213 and 2528 bits with SLIX2.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest industry news, information on new product releases, upcoming events, white papers, articles, and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]