1. everything RF
  2. RF Newsletters
more
PREV 7 Sept, 2020 NEXT

Latest News & White Papers this Week

7 Sept, 2020 - everything RF Newsletter

Top stories this week. View it in your browser

 
Date: 7 Sept, 2020
 
Sponsored by EMC Directory
 
 
 
Latest News this Week
Empower RF Introduces Liquid Cooled, High Power SSPAs with a Scalable Architecture - Empower RF
UL Opens the Largest 5G Testing Facility in Silicon Valley - UL
Lockheed and Ball Aerospace Complete Testing of Multi-Band Phased Array Antenna for Space Force - Lockheed Martin
ZTE Conducts First 5G Carrier Aggregation Verification for 700 MHz & 2.6 GHz Commercial Systems - ZTE
World's First Phased Array 4D Imaging Radar On A Chip for the Automotive Industry - RFISee
L3Harris Technologies Selected by Airbus to Build a Space Reflector Antenna - L3Harris Technologies
Qualcomm & Ericsson Conduct World’s First Extended-Range 5G NR Data Call Over mm-Wave - Qualcomm
Singapore is Getting Ready to Become Asia’s Epicentre for GaN Semiconductor Technology - IGaN
New 6 GHz Ultra-Wideband RF/IF Recorder with a Recording Bandwidth of 2.4 GHz - Pentek
Wireless Providers Invested $29 Billion in 2019 to Fast-Track 5G Deployment in USA - CTIA
SIMCom to Launch 5G Modules Based on the Release 16 Standard in 2021 - SIMCom
More News
New White Papers & Articles
A High Efficiency, Ka-Band, GaN-on-SiC MMIC with Low Compression - Wolfspeed, A Cree Company
Getting Started: An Introduction to Inductor Specifications - Coilcraft
Fiber Will Enable 5G and a Lot More - MilesTek
Challenges for Electronic Circuits in Space Applications - Analog Devices
Measurements on Devices with Very High Noise Figure - Rohde & Schwarz
More White Papers
On-Demand Webinar
Event Image
Innovation with Diamond Technology-Live Panel Discussion hosted by RFHIC
Date: On-Demand
Location: Online
More Events
Featured Products this Week
RF Amplifier
400 to 6000 MHz LNA for FDD and TDD 4G LTE Systems

RF Amplifier  from Skyworks Solutions

The SKY67183-396LF from Skyworks Solutions is a Low-Noise Amplifier that operates from 400 to 6000 MHz. The amplifier provides a linear gain of 17.7 dB with a noise figure of 1.1 dB and has a P1dB of 20 dBm. It requires a DC supply of 5 V and draws a current of up to 56 mA. The amplifier has internal bias circuitry that provides stable performance over temperature and process variation.
Download Datasheet | Product Details
RF Transistor
5 W S-Band GaN HEMT from 2.5 to 3.8 GHz

RF Transistor  from Mitsubishi Electric US, Inc.

The MGFS37G38L2-01 from Mitsubishi Electric is a GaN HEMT that operates from 2.5 to 3.8 GHz. It provides a saturated output power of up to 37 dBm with a gain of 18 dB and has a typical drain efficiency of up to 60%. The device requires a supply voltage of 55 V and can handle up to 27 dBm of input power. The transistor is available in a GF-67 package that measures 7.2 x 6.6 mm.
Download Datasheet | Product Details
Down Converter
10 MHz to 50 GHz Downconversion System for Phase Noise Measurements

Down Converter  from Holzworth Instrumentation

The HA7063A from Holzworth is a Heterodyne Downconversion System that can accept an input RF signal from 10 MHz to 50 GHz. This system has been designed to seamlessly integrate with Holzworth's real-time phase noise analysis products as an ANSI z540 calibrated frequency extension. It downconverts the signal to DC to 40 MHz (with HA7062C) and DC to 100 MHz (with HA7062D).
Download Datasheet | Product Details
RF Spectrum Analyzer
Handheld Spectrum Analyzer for 5G-NR Applications

RF Spectrum Analyzer  from Deviser

The E8900A from Deviser is a Handheld Spectrum Analyzer that operates from 9 kHz to 9 GHz. It performs standard spectrum analysis up to 9 GHz and 5G NR analysis up to 6 GHz. The analyzer has an IF span of 100 MHz and can conduct over 3 Full Sweep scans/second at 7.8 kHz RBW. The analyzer is available in a module that measures 12.4 x 9.0 x 3.0 inches with a 10.1 inch capacitive touchscreen display.
Download Datasheet | Product Details
GNSS Module
Multi-Channel GNSS Module for IoT Applications

GNSS Module  from OriginGPS

The ORG4600 from OriginGPS is a Miniature, Multi-Channel GNSS Module. It supports GPS, GLONASS, BDS+GALILEO, QZSS, and IRNSS constellations and other regional overlay system receivers that continuously track all satellites in view, providing real-time positioning data in an industry-standard NMEA format. It is available in a SiP LGA package that measures 10 x 10 x 1.85 mm.
Download Datasheet | Product Details
GPS/GNSS Antenna
Dual Feed Patch Antenna for GNSS Applications

GPS/GNSS Antenna  from AVX Corporation

The 1002649 from Ethertronics is a Dual Feed Patch Antenna for GNSS applications that supports 1.559 – 1.563 GHz (Beidou), 1.575 GHz (GPS), 1.559 – 1.591 GHz (Galileo), and 1.593 – 1.610 GHz (GLONASS) bands. It provides up to 5.5 dBi of gain and has an axial ratio of 1 dB. The antenna is available in a plastic tray packaging.
Download Datasheet | Product Details
Sponsored by PCB Directory
 
 
 
Bi-Directional Coupler
20 dB Surface Mount Bi-Directional Coupler from 2.5 to 6 GHz

Bi-Directional Coupler  from Innovative Power Products

The IPP-8007 from Innovative Power Products is a Bi-Directional Coupler that operates from 2.5 to 6 GHz. It provides a coupling factor of 20 dB (0.5 dB coupling deviation), has a directivity of 18 dB and an insertion loss of less than 0.4 dB. This coupler can handle up to 100 W of input power and has a VSWR of less than 1.35:1. It is available in a surface-mount package that measures 0.35 x 1 mm.
Download Datasheet | Product Details
RF Amplifier
Pico-Cell Booster Amplifier for GSM/EDGE Applications

RF Amplifier  from Communication Components Inc

The BDA-1819-10 from Communication Components Inc. is a Pico-Cell Booster Amplifier with an uplink frequency from 1850 to 1910 MHz and a downlink frequency from 1930 to 1990 MHz. On the uplink side, it delivers a gain of 8 dB with a noise figure of less than 2.5 dB. On the downlink side, it delivers an output power of more than +40 dBm with a gain of 25 dB.
Download Datasheet | Product Details
RF Switch
GaAs MMIC SPDT Switch from DC to 12 GHz

RF Switch  from SuperApex Corporation

The SAC3216 from SuperApex Corporation is a GaAs MMIC SPDT Switch that operates from DC to 12 GHz. It has a switching speed of 15 ns, an insertion loss of 2.3 dB at 12 GHz, and provides isolation of 45 dB. The switch can handle up to 30 dBm of input power. It operates using complementary negative control voltage logic lines of 0/-5V and requires no bias supply.
Download Datasheet | Product Details
RF & Microwave Circulator
4 to 8 GHz Cryogenic Isolator

RF & Microwave Circulator  from Low Noise Factory

The LNF-ISC4_8A from Low Noise Factory is an ultra-low insertion loss cryogenic isolator that operates from 4 to 8 GHz. It provides isolation of 22 dB and insertion loss of 0.17 dB. The isolator has been designed to meet the strict requirements of ultra-low temperature physics research. The isolator is available in a slim coaxial module that measures 22.3 x 24.6 x 10.2 mm with SMA connectors.
Download Datasheet | Product Details
RF Amplifier
Ku-Band Waveguide Low Noise SATCOM Amplifier

RF Amplifier  from AmpliTech

The APTW6-10701275-75K10-WR75-D6 from AmpliTech is a high gain, low noise SATCOM amplifier that operates from 10.7 to 12.75 GHz. It delivers an output power of 15 dBm with a gain of more than 60 dB and a noise figure of 0.88 dB. It is ideal for SATCOM applications, such as for military and civil Satellite Downlinks. This particular frequency range is also widely used for Direct Broadcasting of Radio and TV in Europe.
Download Datasheet | Product Details
Front End Module
2.4 GHz Integrated FEM for Wi-Fi-6 Applications

Front End Module  from Qorvo

The QPF4216 from Qorvo is an integrated front end module (FEM) designed for Wi-Fi 6 (802.11ax) systems. It integrates a 2.4 GHz power amplifier (PA), regulator, a single-pole two throw switch (SP2T), and a bypassable low noise amplifier (LNA) into a single device. This FEM also integrates a logarithmic power detector, which enables power control across the entire power spectrum.
Download Datasheet | Product Details
RF Amplifier
1260 W GaN SSPA from 5200 to 5900 MHz

RF Amplifier  from RFHIC

The RRP52591K2-42 from RFHIC is a GaN Solid-State Power Amplifier that operates from 5200 to 5900 MHz. This C-band amplifier provides an output power of 1260 W with a gain of 42 dB (0.5 dB flatness) and an efficiency of 35%. It exhibits a pulse width of 100 µs and has a duty cycle of 10 %. This pallet amplifier is fabricated using RFHIC’s cutting edge GaN HEMT technology.
Download Datasheet | Product Details
RF Amplifier
L & S-Band Bi-directional Amplifier from 1625 to 2500 MHz

RF Amplifier  from NuWaves Engineering

The NuPowerXtender 12B04A-07-C030 from NuWaves is a bi-directional amplifier that operates from 1625 to 2500 MHz. This L-Band & S-Band amplifier provides 15 watts of output power in transmit mode and the integrated low-noise amplifier provides a gain of 19 dB in receive mode. It has been developed using gallium nitride (GaN) technology and offers greater than 30% power efficiency at most frequencies.
Download Datasheet | Product Details
RF Variable Attenuator
95.75 dB Programmable Attenuator from 0.3 to 6000 MHz

RF Variable Attenuator  from API Technologies - Weinschel

The 4205A-95.5 from API Technologies – Weinschel is a Programmable Attenuator that operates from 0.3 to 6000 MHz. It has an attenuation range from 0 to 95.75 dB with 0.25 dB steps, an insertion loss of less than 9 dB, and a switching speed of 0.2 µs. The device can handle up to 23 dBm of CW and 28 dBm of pulsed input power.
Download Datasheet | Product Details
RF Power Meter
USB Power Meters (Average/Peak/Pulse + Profiling) from 50 MHz to 20 GHz

RF Power Meter  from Tektronix, Inc.

The PSM5000 Series from Tektronix are compact power sensors/meters that operate from 50 MHz to 20 GHz. They have a dynamic range from -60 dBm to 20 dBm and a measurement speed of up to 2000 readings/second. The PSM5000 Series provides Pulse Power, Duty Cycle, Peak Power, and Crest Factor Measurements.
Download Datasheet | Product Details
Block Up Converter
50 W Ka-Band Block Up-Converter from 30 to 31 GHz

Block Up Converter  from Wavestream Corporation

The JNB-KAM050 from Wavestream is a Ka-Band Deck Block Up-Converter that converts an input frequency from 1000 to 2000 MHz to an output frequency from 30 to 31 GHz. It provides a saturated output power of 50 watts (25 W of linear power) with a small signal gain of 62.5 dB. The device operates over an AC supply voltage of 90 to 264 VAC and draws up to 400 watts of power (at linear output power).
Download Datasheet | Product Details
Waveguide Phase Shifter
Ka-Band Waveguide Phase Shifters from 18.3 to 31 GHz

Waveguide Phase Shifter  from L3Harris Narda-ATM

The 410 Series from L3Harris Narda-ATM are Waveguide Phase Shifters that operate from 18.3 to 31 GHz. They can provide a 0-360° phase shift over the operating frequency range and are precisely adjustable and re-settable. They have an insertion loss of less than 0.3 dB and a VSWR of under 1.25:1. These devices can handle up to 320 W of average power and up to 34 kW of peak power.
Download Datasheet | Product Details
RFID Antenna
Short-Range UHF RFID Antenna from 865 to 867 MHz and 902 to 928 MHz

RFID Antenna  from Times-7

The A1115 from Times-7 is a NearField UHF RFID Antenna that operates from 865 to 867 MHz and 902 to 928 MHz. It enables reliable tag reads within a very constricted read zone. The antenna can handle up to 3 W of power and has a VSWR of 1.95:1. This compact IP54 rated antenna has DC grounded anti-static protection.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events, articles, white papers, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]