PREV 21 April, 2021 NEXT

New RF and Microwave Products this Week

21 April, 2021 - everything RF Newsletter

New products this week. View it in your browser

 
Date: 21 April, 2021
 
Sponsored by AR RF/Microwave Instrumentation
 
 
 
New RF and Microwave Products this Week
Noise Generator
40 GHz Programmable AWGN Noise Generator

Noise Generator  from Noisecom

The UFX7000B from Noisecom is a Programmable AWGN Noise Generator that operates up to 40 GHz. The noise generator incorporates a broadband noise source and noise path attenuator (with a maximum attenuation range of 127 dB in 1 dB steps). It provide an output noise power of up to +30 dBm with excellent flatness.
Download Datasheet | Product Details
Signal Generator
Compact Tunable Signal Generator from 10 MHz to 15 GHz

Signal Generator  from Windfreak Technologies

The SynthHD Mini from Windfreak is a Software Tunable Signal Generator that operates from 10 MHz to 15 GHz with a 0.01 Hz resolution. It delivers an output power of up to 20 dBm with a minimum resolution of 0.01 dB. The generator supports FM, AM, Pulse, Sweep, and List modulations. It can be powered by a device running Windows, Linux or Android via the USB port.
Download Datasheet | Product Details
GNSS Anti-Jamming Solution
GNSS Anti-Jamming CRPA System

GNSS Anti-Jamming Solution  from TUALCOM

The TUALAJ 8300 from Tualcom is a GNSS Anti-Jamming CRPA solution with an embedded receiver that provides jam free GNSS signals for critical missions. It eliminates interference by applying a novel beamforming technique. With an 8-array Controlled Reception Pattern Antenna (CRPA) antenna, the system can ensure normal operation of a GNSS receiver in the presence of multiple jamming sources.
Download Datasheet | Product Details
RF Amplifier
10 W Solid-State Power Amplifier from 26.5 to 40 GHz

RF Amplifier  from Exodus Advanced Communications

The AMP4072A from Exodus Advanced Communications is a Solid-State Power Amplifier (SSPA) that operates from 26.5 to 40 GHz. It delivers a saturated output power of more than 10 W with gain of more than 40 dB. The amplifier has excellent gain flatness, optional monitoring parameters for forward/reflected power, voltage, current and temperature sensing for good reliability and ruggedness.
Download Datasheet | Product Details
Integrated Microwave Assembly
Frequency Up/Down Converter from 0.5 to 18 GHz

Integrated Microwave Assembly  from Cobham Advanced Electronic Solutions

The Model 3U from Cobham Advanced Electronic Solutions (CAES) is a frequency Up/Down Converter that operates from 0.5 to 18 GHz. This SOSA-aligned, conduction cooled, VPX RF Payload Card, provides one channel for up conversion, one channel for down conversion, and a synthesizer in a single, 3U slice. It has been designed to be an RF front end for electronic warfare, ELINT and electronic support/surveillance/attack.
Download Datasheet | Product Details
RF Amplifier
20 dBm Power Amplifier from 37 to 67 GHz

RF Amplifier  from AT Microwave

The AT-PA-3767-3320VC from Shanghai AT Microwave is a Power Amplifier that operates from 37 to 67 GHz. It delivers a saturated output power of 20 dBm with a gain of more than 28 dB and has a noise figure of 5 dB. The amplifier requires a supply voltage of 5 V and draws 500 mA of current. It is available in a module that measures 30 x 30 x 14 mm and has 1.85 mm female connectors.
Download Datasheet | Product Details
Sponsored by AR RF/Microwave Instrumentation
AR RF/Microwave Instrumentation
Gain confidence in choosing a suitable field probe
Understanding field probe specification definitions, design characteristics, and other various features allows for an informed decision in choosing a suitable field probe solution. Learn the specifics of these parameters by reading RF Field Probe Specifications and Design Characteristics. Click here to learn more.
 
RF Amplifier
Low Noise Amplifier from 10.7 to 12.8 GHz

RF Amplifier  from AmpliTech

The APTW5-10701280-45K10-WR75-D6 from Amplitech is a Low Noise Amplifier that operates from 10.7 to 12.8 GHz. It provides a high gain of 42 dB (flatness of ± 0.5 dB) with a noise figure of less than 0.63 dB and has a noise temperature of 45 K. This LNA is fabricated using state-of-the-art GaAs pHEMT technology. It requires a supply voltage of 15 V and consumes up to 190 mA of current.
Download Datasheet | Product Details
Power Divider
2 Way Power Divider from 1.8 to 5 GHz

Power Divider  from American Microwave Corporation

The PDV-2W01 from American Microwave Corporation is a 2-Way Power Divider that operates from 1.8 to 5 GHz. It can handle an input power of 5 W, has an insertion loss of less than 0.4 dB and provides an isolation of more than 20 dB. The divider has a phase imbalance of less than 5 degrees and an amplitude imbalance of under 0.6 dB. It is available in a module with coaxial connectors.
Download Datasheet | Product Details
Software
3D EM Simulation Software for High-Fidelity Computations

Software  from Remcom

XFdtd is a full-wave 3D EM solver that simplifies the analysis of complex EM problems and leads the market in FDTD-based modeling and simulation. With unrivaled speed, XF is the leader for complex, high-fidelity EM simulations. Applications include microwave devices such as waveguides, power dividers, and filters; antenna design and placement; EMI/EMC testing; static discharge; signal integrity; SAR validation; radar and scattering; and photonics.
Download Datasheet | Product Details
Software
High Precision 3D Full-Wave Electromagnetic Simulator

Software  from ZWSOFT

The ZWSim-EM from ZWSoft is a 3D Full-Wave Electromagnetic Simulator with high precision, high efficiency, low memory footprint and powerful modelling capabilities. It provides users with an industry-specific, RF-related, and all-in-one simulation solution. ZWSim-EM has an easy-to-use, user friendly interface and clear workflow.
Download Datasheet | Product Details
Vector Network Analyzer
4-Port Vector Network Analyzer from 100 kHz to 9 GHz

Vector Network Analyzer  from Copper Mountain Technologies

The C2409 from Copper Mountain Technologies is a 4-port modular vector network analyzer that operates from 100 kHz to 9 GHz. The VNA can measure all S parameters S11, S12, S21, S22, S44 and can be controlled using any Windows or Linux PC, laptop, tablet, or x86 board computer connecting to the measurement hardware via USB interface. It has a dynamic range of up to 162 dB (1Hz IF BW), directivity of 46 dB and sweep speeds of as low as 10 microseconds per point.
Download Datasheet | Product Details
RF Variable Attenuator
USB Powered 4-Channel Programmable Attenuator from 0.1 to 8 GHz

RF Variable Attenuator  from API Technologies

The 4400-8-31.5 from API Technologies is a 4-channel Programmable Attenuator that operates from 0.1 to 8 GHz. It provides an attenuation range of 31.5 dB with a step size of 0.5 dB and a switching speed of 50 ns. The attenuator has an insertion loss of less than 2.2 dB and can handle an input power of up to 28 dBm with a VSWR of less than 1.9:1.
Download Datasheet | Product Details
Sponsored by AR RF/Microwave Instrumentation
 
 
 
Wireless SoC
2.4/Sub-1 GHz Wireless SoC for Low Energy Applications

Wireless SoC  from Silicon Labs

The EFR32FG12 from Silicon Labs is a family of Wireless SoCs that operate in the 2.4 GHz and Sub-1 GHz bands. This is a certified Wi-SUN solution that combines the industry-leading EFR32 hardware platform, full-featured IPv6 mesh stack, and advanced development tools to enable secure wireless connectivity for advanced metering infrastructure (AMI), street lighting networks, asset management, and smart city sensors.
Download Datasheet | Product Details
RF Module
2.4 GHz Wirepas Radio Module for IoT Applications

RF Module  from Wurth Elektronik

The Thetis-I from Würth Elektronik is a 2.4 GHz Radio Module that supports the Wirepas routing mesh communication protocol. It has a line of sight range of 400 m and an RF bitrate of up to 1 Mbps. The module delivers a Tx power of 6 dBm and has an Rx sensitivity of up to -92 dBm. It requires a DC supply of 1.8-3.6 V, consumes 18.9 mA of current in Tx mode, 7.7 mA in Rx mode, and 3.16 µA in sleep mode.
Download Datasheet | Product Details
Cellular IoT Module
LTE UE Cat NB2 Modules for Low-Data Throughput IoT Applications

Cellular IoT Module  from Telit Communications

The NE310L2 Series from Telit are LTE UE Cat NB2 modules that are designed for low-data throughput IoT applications. They deliver an uplink data rate of up to 160 Kbps (LTE) & 42.8 Kbps (GPRS fallback variant) and a downlink data rate of up to 120 Kbps (LTE) & 85.6 Kbps (GPRS fallback variant). These modules require a DC supply of 3.2-4.2 V and consume less than 45 µA of current.
Download Datasheet | Product Details
Cellular Module
2x2 MIMO 5G mmWave Antenna Module

Cellular Module  from Qualcomm

The QTM545 from Qualcomm is a 2x2 MIMO 5G mmWave Antenna Module that covers the 24.25-27.5, 26.5-29.5 GHz, 27.5-28.35 GHz, 37-40 GHz, and 39.5-43.5 GHz mmWave spectrum bands. The module uses Qualcomm Smart Transmit 2.0 and Qualcomm 5G PowerSave 2.0 technology to boost performance and battery life. It is designed for integration with Qualcomm Snapdragon X65 and X62 Modem-RF systems.
Download Datasheet | Product Details
RF Amplifier
40 W X-band GaN MMIC Amplifier from 7.9 to 11 GHz

RF Amplifier  from Wolfspeed, A Cree Company

The CMPA801B030S from Wolfspeed is an X-band GaN MMIC Power Amplifier that operates from 7.9 to 11 GHz. This 2-Stage amplifier delivers a saturated output power of up to 40.7 W and with 20 dB of large signal gain and 40% efficiency. It is available in a plastic overmold QFN package that measures 7x7 mm and requires a 28 V DC Supply. The amplifier is ideal for military and commercial pulsed radar systems.
Download Datasheet | Product Details
RF Mixer
1 to 13 GHz High Linearity Mixer with Integrated LO Amplifier

RF Mixer  from Marki Microwave

The MT3A-0113H from Marki Microwave is Two-Tone-Terminator mixer integrated with a low phase noise LO driver amplifier. This triple balanced mixer has an LO/RF frequency from 1 - 13 GHz and an IF Frequency from 0.5 - 8.5 GHz. It requires +6 dBm LO input for high linearity, and with an increased LO can achieve up to +30dBm IIP3.
Download Datasheet | Product Details
Directional Coupler
Space Qualified Directional Coupler from 1 to 40 GHz

Directional Coupler  from KRYTAR

The 101040010K-SQ from Krytar is a Space-Qualified Directional Coupler that operates from 1 to 40 GHz. It has a coupling factor of 10 dB and a directivity of more than 10 dB. The coupler has an insertion loss of less than 2 dB and a frequency sensitivity of ±1.20 dB. It can handle an average input power of 20 W and a peak input power of 3 kW.
Download Datasheet | Product Details
RF & Microwave Circulator
Cryogenic Circulator from 8 to 12 GHz

RF & Microwave Circulator  from QuinStar Technology Inc

The QCY-G0801202 from QuinStar Technology is a Cryogenic Circulator that operates from 8 to 12 GHz. This field-displacement device offers exceptional broadband performance down to the mK temperature range. The circulator housing is made of OHFC copper and designed for optimal thermalization. Magnetic shielding options are also available.
Download Datasheet | Product Details
RF Connector
NEX10 Coaxial Cable Connector from DC to 20 GHz

RF Connector  from Rosenberger

The 89-000-000_TD from Rosenberger is a NEX10 Coaxial Cable Connector that operates from DC to 20 GHz. The NEX10 Connector Interface is a low PIM coax connector interface developed specifically for small cell applications. The highlight of the NEX10 connector system is its robustness, PIM stability and flexibility of different coupling mechanisms (torque/screw and push-pull).
Download Datasheet | Product Details
Antenna
4-Port 4x4 MIMO Panel Antenna from 694 to 4000 MHz

Antenna  from Spinner Group

The A77676 from the Spinner Group is a 4-Port 4x4 MIMO Antenna that operates from 694 to 4000 MHz. This ±45° polarized antenna provides a gain of 6.5 dBi. It has a horizontal beamwidth of 75° (@694 to 960 MHz) and a vertical beamwidth of 70° (@694 to 960 MHz). The antenna can handle an input power of up to 50 W (per port), has a VSWR of less than 1.8 and a passive intermodulation (PIM) of less than -153 dBc.
Download Datasheet | Product Details
Antenna
4-Port Dual Polarized Antenna from 3300 to 4200 MHz

Antenna  from Communication Components Inc

The QPA65R-H2A from Communication Components Inc (CCI) is a 4-port Antenna that operates from 3300 to 4200 MHz. This 45° dual-polarized antenna provides a gain of up to 17.6 dBi and has a front-to-back ratio of more than 35 dB. It has an azimuth beamwidth of up to 62 degrees and an elevation beamwidth of up to 6.8 degrees.
Download Datasheet | Product Details
Wireless Charging Receiver
30 W Wireless Charging Receiver with Integrated Capacitor Divider and Wattshare Technology

Wireless Charging Receiver  from Renesas

The P9412 from Renesas is a Single Chip Wireless Power Receiver IC for 30 W applications. The device can be configured to receive or transmit an AC power signal through magnetic induction. As a receiver, this IC receives an AC power signal from a wireless transmitter, and converts it into a rectified output voltage, then further divides it in half with the integrated capacitive divider.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events, articles, white papers and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]