PREV 5 May, 2021 NEXT

New RF and Microwave Products this Week

5 May, 2021 - everything RF Newsletter

New products this week. View it in your browser

 
Date: 5 May, 2021
 
Sponsored by Digi-Key
 
 
 
New RF and Microwave Products this Week
Front End Module
Wi-Fi 6E Front-End IC from 5.150 to 7.125 GHz

Front End Module  from NXP Semiconductors

The WLAN7205C from NXP Semiconductors is a Wi-Fi 6E front-end IC that operates from 5.150 to 7.125 GHz. It consists of a power amplifier with a directional coupler, a low noise amplifier (LNA), and a single pole double throw (SPDT) switch. The IC also includes coexistence filters for both transmit and receive channels. It is available in a 2 x2 mm QFN package with ESD protection on all pins.
Download Datasheet | Product Details
RF Transceiver
8x8 MIMO Wi-Fi 6 Transceiver from 5 to 7 GHz

RF Transceiver  from ON Semiconductor

The QT7860 from ON Semiconductor is a Wi-Fi 6 Transceiver that operates from 5 to 7 GHz. This transceiver can support an 8Tx/8Rx chain for 8 x 8 MIMO or then as two independent 4x4 MIMO chains. It can support bandwidths of 20/40/80/160 MHz in both 4x4 and 8x8 modes. This transceiver has integrated baluns for the Tx Outputs and Rx Inputs. It also has integrated LNAs.
Download Datasheet | Product Details
GPS/GNSS Disciplined Oscillator
Compact, Low Cost, Low Noise GPS/GNSS Disciplined Rubidium Oscillator

GPS/GNSS Disciplined Oscillator  from Orolia

The Spectratime LNRClok-1500 from Orolia is compact, smart, low cost, low noise GPS/GNSS-disciplined Rubidium oscillator (GPSDO) with an optional integrated GPS / GNSS receiver. This 10 MHz Disciplined Rubidium Oscillator delivers a sine wave output with a phase noise of -145 dBc/Hz at 1 kHz offset, has harmonics of less than -40 dBc and spurious levels of below -80 dBc.
Download Datasheet | Product Details
Microwave Generator
4 KW Programmable Signal Source from 960 to 1215 MHz

Microwave Generator  from Technical Services Laboratory Inc.

The 1415-4000-X from Technical Services Laboratory is a High-Power Programmable Signal Source that operates from 960 to 1215 MHz. It delivers an output power from 40 dBm to 67 dBm (4 kW) with an accuracy of ±0.5dB and a resolution of 0.1 dB. This signal source allows preprogrammed waveforms to be generated, or lets the user provide pulse signals to modulate the RF output (in the Case of IFF). It is ideal for testing TACAN/DME and IFF (Identification Friend or Foe) scenarios.
Download Datasheet | Product Details
RF Transceiver
E-band Transceiver Module from 71-76 / 81-86 GHz

RF Transceiver  from Filtronic

The Morpheus II from Filtronic is an E-band RF Transceiver that provides a turn-key solution for carrier-grade mobile XHaul applications. This transceiver has integrated Tx/Rx modules that operate from 71-76 / 81-86 GHz and features a diplexer that can be interfaced with an antenna. It can support a data rate of up to 10 Gbps and spectrally efficient 256QAM modulation.
Download Datasheet | Product Details
Sponsored by Digi-Key
BGM220
BGM220 Explorer Kit-small with low cost
Kit features a USB interface, an on-board SEGGER J-Link debugger, one user-LED and button. Hardware add-on support allows applications using endless combination of boards from mikroE, sparkfun, AdaFruit, and Seeed Studios. Click here to learn more.
 
Vector Network Analyzer
2-Port Metrology Grade Vector Network Analyzer from 300 kHz to 4.5 GHz

Vector Network Analyzer  from Copper Mountain Technologies

The M5045 from Copper Mountain Technologies is a 2-port metrology-grade Vector Network Analyzer that operates from 300 kHz to 4.5 GHz. It can measure all four S parameters (S11, S21, S12, and S22) and delivers metrology-grade performance in a more economical package. This VNA has a USB interface and can operate using Software which can be installed on any Windows / Linux PC, laptop, tablet, or x86 board based computer.
Download Datasheet | Product Details
RF Spectrum Analyzer
Rugged 40 GHz Intelligent RF Receiver

RF Spectrum Analyzer  from CRFS

The RFeye Node 100-40 from CRFS is a Rugged Intelligent Wideband Receiver that operates from 9 kHz to 40 GHz. The receiver is a complete spectrum monitoring and geolocation system designed for remote deployment both indoors and outdoors and in hostile environments. It can be used for a wide range of applications including Military – Test range monitoring, EMCON Satellite monitoring and Upper 5G monitoring.
Download Datasheet | Product Details
RF Switch
SP4T Absorptive PIN Diode Switch from 2 to 18 GHz

RF Switch  from G.T. Microwave, Inc.

The S4N-69-1AB from G.T. Microwave is an SP4T Absorptive PIN Diode Switch that operates from 2 to 18 GHz. It has an insertion loss of less than 4.5 dB and provides isolation of more than 60 dB. The switch can handle CW input power of +27 dBm and has a VSWR of less than 2.1:1. It has a 2-bit binary TTL compatible logic with a switching speed of 900 ns.
Download Datasheet | Product Details
RF Amplifier
12 W Solid-State Power Amplifier from 18 to 26.5 GHz

RF Amplifier  from Exodus Advanced Communications

The AMP4032A from Exodus Advanced Communications is a Solid-State Power Amplifier that operates from 18 to 26.5 GHz. It delivers a saturated output power of more than 12 W (CW or Pulsed) with a gain of over 40 dB. The amplifier has a Class A/AB linear design which is suitable for all modulations & industry standards and is a great TWT replacement. It is suitable for EMI/RFI, lab, CW/Pulse, and all communication applications.
Download Datasheet | Product Details
RF Amplifier
1000 W Power Amplifier from 80 MHz to 1 GHz

RF Amplifier  from ETS-Lindgren

The 8000-007 from ETS-Lindgren is a Power Amplifier System that operates from 80 MHz to 1 GHz. It provides up to 1000 W of power and has been designed primarily for commercial and military EMC testing applications that include IEC/EN 61000-4-3, 30 V/m and RS103, 200 V/m requirements. The amplifier has harmonics of up to -20 dBc and provides low distortion and tolerance for 100% mismatch.
Download Datasheet | Product Details
Sponsored by Digi-Key
Development Kit
LoRa Passive Components Development Kit
Raltron has developed high performance passive components suitable for LoRa products, all available in one development kit. Raltron's LoRa development kit includes Crystals, SAW Filters, Stub Antennas, TCXOs and Ceramic Filters. Click here to learn more.
 
RF Amplifier
28 dB Low-Noise Amplifier from 5.4 to 5.9 GHz

RF Amplifier  from AmpliTech

The APT3-05400590-1010-LS-D4-FAC from AmpliTech is a Low-Noise Amplifier that operates from 5.4 to 5.9 GHz. It provides a gain of more than 28 dB, has a noise figure of less than 1 dB, and a P1dB of over 10 dBm. An internal limiter provides protection against up to 2 W CW RF input power over the full band. It requires a DC supply voltage from 5 to 15 V with a typical current consumption of 80 mA.
Download Datasheet | Product Details
Block Up Converter
300/400/500 W X-Band GaN SSPA BUCs from 7.9 to 8.4 GHz

Block Up Converter  from Advantech Wireless Technologies

The Cascade-X Line of BUCs from Advantech Wireless are X-Band GaN SSPA BUCs that up-convert an input frequency from 950 - 1450 MHz to an output frequency from 7.9 - 8.4 GHz. They are available in multiple output power configurations of 300/400/500 W with a gain of more than 70 dB. The BUCs have an advanced customer interface and an embedded HTTP web page, that allow monitoring and control of the BUC and system redundancy.
Download Datasheet | Product Details
Wireless SoC
Dual Processor SoC for Bluetooth 5.1, Bluetooth Mesh, NFC, Thread and Zigbee

Wireless SoC  from Nordic Semiconductor

The nRF5340 from Nordic Semiconductor is a Dual Processor SoC that supports Bluetooth 5.1, Bluetooth mesh, NFC, Thread & Zigbee. It has two Arm Cortex-M33 processors and supports an extensive range of wireless protocols. Arm TrustZone provides trusted execution by implementing a division between secure and non-secure Flash, RAM, peripherals, and GPIOs.
Download Datasheet | Product Details
RF Module
2.4/5 GHz Wi-Fi 5 + Bluetooth 5.2 Module

RF Module  from Laird Connectivity

The Sterling LWB5+ from Laird Connectivity is a 2.4/5 GHz Dual Mode WLAN (802.11a/b/g/n/ac) and Bluetooth 5.2 Module that is designed for next-gen wireless IoT applications. It delivers data rates of up to 433.3 Mbps (WLAN) and 3 Mbps (Bluetooth). The module is based on the Cypress CYW4373EUBGT 802.11ac/a/b/g/n chipset and has an integrated PA, LNA, transmit/receive RF paths including a diplexer, switches, reference crystal oscillator, power management units and an optional ceramic chip antenna, MHF4 RF connector, or RF trace pad.
Download Datasheet | Product Details
GNSS Module
Dual-Band GNSS Module with RTK for Automotive Applications

GNSS Module  from Quectel

The LG69T from Quectel is a dual-band GNSS module that supports six constellations: GPS, GLONASS, Galileo, BeiDou, QZSS, and NAVIC (former IRNSS). It has multi-band RTK technology that enables centimeter-level accuracy. The module is based on the 5th generation STMicroelectronics® positioning receiver platform that has 80 tracking channels and 4 fast acquisition channels.
Download Datasheet | Product Details
GPS/GNSS Antenna
High-Precision GNSS Stacked Patch Antenna from 1176.45 to 1602 MHz

GPS/GNSS Antenna  from Taoglas

The GPDF5012.A from Taoglas is a Multiband High-Precision GNSS Stacked Patch Antenna that operates from 1176.45 to 1602 MHz. It provides excellent positional accuracy and supports GPS (L1/L2/L5), IRNSS (L5), QZSS (L1/L2C/L5), Galileo (E1/E5a/E5b), GLONASS (G1/G2/G3), and BeiDou (B1/B2a/B2b) bands. The antenna measures 50 x 50 mm and has an I-PEX MHFI connector.
Download Datasheet | Product Details
RF Switch
SP6T Switch for Multimode LTE and WCDMA Applications from 0.1 to 6 GHz

RF Switch  from Infineon Technologies

The BGS16MA12 from Infineon Technologies is an SP6T Switch that operates from 0.1 to 6 GHz for multimode handsets based on LTE and WCDMA. It has an insertion loss of less than 1.45 dB and provides an isolation of up to 50 dB. The switch requires a DC supply of 1.65-1.95 V and is fully compatible with the MIPI 2.0 RFFE standard interface.
Download Datasheet | Product Details
Digital Phase Shifter
GaAs MMIC 6-bit Digital Phase Shifter IC from 8.5 to 10.5 GHz

Digital Phase Shifter  from United Monolithic Semiconductors

The CHP3015-QDG from United Monolithic Semiconductors is an X-band GaAs MMIC Digital Phase Shifter IC that operates from 8.5 to 10.5 GHz. It has a phase-shift range from 0 to 360 degrees with a step size of 5.625 degrees. This 6-bit phase shifter IC has an insertion loss of 8 dB and can handle input power of up to 23.5 dBm.
Download Datasheet | Product Details
Band Pass Filter
Bandpass BAW Filter for CBRS Applications from 3550 to 3700 MHz

Band Pass Filter  from Akoustis

The AKF-1336 from Akoustis is a Bandpass BAW Filter developed for the CBRS band. It has a center frequency of 3625 MHz and a passband from 3550 to 3700 MHz. The filter has an insertion loss of less than 1 dB and provides over 15 dB of attenuation from 3450 to 3530 MHz. It can handle up to 30 dBm of CW input power and has a return loss of 16 dB.
Download Datasheet | Product Details
Bias Tee
Bias Tee from 0.5 to 2.5 GHz

Bias Tee  from MECA

The 200M-FF-2 from MECA is a Bias Tee that operates from 0.5 to 2.5 GHz. It can handle max DC levels of 100 VDC/7 Amps and input RF power of up to 300 watts (3 kW peak). The Bias Tee has an insertion loss of under 0.5 dB, isolation of over 25 dB and a VSWR of 1.40:1. It is available in a module with 4.3/10.0 and SMA female connectors. 7/16 DIN, N, BNC and TNC connector options are also available.
Download Datasheet | Product Details
Triplexer
Suspended Substrate Stripline Triplexer from DC to 15 GHz

Triplexer  from Mini Circuits

The Z3SS-7000-S+ from Mini Circuits is a Suspended Substrate Stripline Triplexer with a passband from DC-1600, 2600-5500 and 7000 to 15000 MHz. It can handle an input power of 3 W, has a passband insertion loss of less than 3 dB and provides a stopband rejection of up to 90 dB. It has a printed circuit board suspended between two parallel ground planes which ensures low insertion loss and high Q.
Download Datasheet | Product Details
RF Cable
Triple Shielded Coaxial Test Cables Operate up to 26 GHz

RF Cable  from Times Microwave Systems

The SilverLine Test Cables from Times Microwave Systems are triple shielded coaxial test cables that operate up to 26 GHz. They have an armored diameter of 11.5 mm and an armored bend radius of 57 mm. These cables have phase stability of +/-2° and a VSWR of less than 1.35:1. The cables are fabricated from a rugged, solid PTFE dielectric cable with stainless steel connectors.
Download Datasheet | Product Details
RFID Tag
Dry/Wet UHF RFID Inlay for Apparel and Automotive Applications

RFID Tag  from Avery Dennison

The AD-151iM from Avery Dennison is a UHF RFID dry/wet Inlay that operates from 860 to 960 MHz. It is based on the UCODE G2iM chip by NXP that has 256 bits of EPC memory, and 512 bits of User memory. This RFID Inlay has a TID memory of 96 bits, including a perma-locked unique 48-bit serial number, and a 16-bit unalterable XTID header.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide users with the latest news, information on new product releases, upcoming events, white papers, articles and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]