PREV 10 May, 2021 NEXT

Latest News & White Papers this Week

10 May, 2021 - everything RF Newsletter

Top stories this week. View it in your browser

 
Date: 10 May, 2021
 
Sponsored by MilliBox
 
 
 
Latest News this Week
Analog Devices Develops Ka-band Beamformer ICs for Aerospace and Defense Applications - Analog Devices
Epirus Introduces Microwave Energy Based Weapon System to Knock Out Drones with High Precision - Epirus
AMETEK Acquires NSI-MI Technologies for $230 Million - AMETEK CTS
Tests Show that mm-Wave 5G is 16x Faster than Sub-6 GHz 5G - Qualcomm
Researchers Develop Silicon based Multiplexer to Effectively Manage Terahertz Waves for 6G Applications - Osaka University
Triad RF’s Amplifier Powering BCT's Nano-Satellite for an Ultra-Long Range Data Communication Link - Triad RF Systems
ABI Research Forecasts Over 9 Million 5G Microwave Backhaul Links by 2026 - ABI Research
Companies Urging the FCC to Open up the 12 GHz Spectrum Band for 5G Applications - FCC
ERZIA has Developed a Unique RF Subsystem Used in Raytheon's Advanced Radar Detection System - ERZIA
Vodafone and Qualcomm Collaborate to Build 5G Infrastructure using Open RAN Technology - Qualcomm
CENOS Introduces an Affordable, Easy to Use Simulation Software for Antenna Design - CENOS
Qorvo Announces Q4 2021 Financial Results, Revenue Exceeds Expectations - Qorvo
More News
New White Papers & Articles
Solving RF Isolation Issues with RF Inductors - Coilcraft
Threat Simulation and Verification for Radar Warning Receiver Testing - Rohde & Schwarz
LoRaWAN® Gateways: Radio Coexistence Issues and Solutions - LoRa Alliance
Design of a Broadband 3 GHz to 20 GHz High Performance Integrated Mixer with 0 dBm LO Drive - Analog Devices
4D Imaging Radar Addressing the Rising Complexity and Cost of Automotive Safety - Vayyar
More White Papers
Sponsored by MilliBox
MilliBox
MilliBox mmWave & THz Antenna Test Systems
MilliBox is a family of mmWave anechoic chambers and 3D antenna positioners which are modular, compact, and affordable. MilliBox is designed for OTA measurements of phased arrays and is ideal for individual daily usage on a lab bench. It is a compelling solution for teams looking for fast test turnaround. Click here to learn more.
 
Upcoming Event
Event Image
MNT Forum 2021
Date: 17 to 18 May, 2021
Location: Online
More Events
Featured Products this Week
RF Spectrum Recording and Playback System
500 MHz to 18 GHz Multi-Channel Playback & Acquisition System for EW Applications

RF Spectrum Recording and Playback System  from Giga-tronics

The GT-COMPASS-18A from Giga-tronics is a Multi-Channel Playback Acquisition & Storage System (COMPASS) for Electronic Warfare applications with up to 4 coherent RF channels covering 500 MHz to 18 GHz. It supports any combination of upconversion from IF and down conversion to IF and has excellent spectral purity, phase noise, noise figure, high dynamic range, tuning speed, tuning resolution, and real-time control across a very large RF operating range with high instantaneous bandwidth.
Download Datasheet | Product Details
Handover Test System
8x8 Full Fan-Out Handover Test System from 2 to 6 GHz

Handover Test System  from JFW Industries

The 50PA-912 from JFW Industries is an 8 X 8 Cellular Handover Test System that operates from 2 to 6 GHz. It is constructed with power divider/combiners on both halves of the matrix with programmable attenuators in between. The test system consists of 64 solid-state step attenuators, each RF path having its own attenuator, providing an attenuation range from 0 - 95 dB in 1 dB steps.
Download Datasheet | Product Details
Microwave Backhaul Radio Links
Point-to-Point Licensed Microwave Backhaul Radio from 6 to 38 GHz

Microwave Backhaul Radio Links  from Cambium Networks

The PTP 820S from Cambium Networks is a Point-to-Point Licensed Microwave Backhaul Radio operates from 6 to 38 GHz. It supports QPSK to 2048 QAM w/ACM modulation techniques in 1+0, 1+1 HSB and 2+0 configurations. The radio has a data rate of up to 833 Mbps with multi-layer compression. It requires a DC supply voltage of -48 V, supports Power-over-Ethernet (-48 v or +24 V), and consumes less than 40 W of power.
Download Datasheet | Product Details
RF Amplifier
100 W Pulsed/CW Amplifier from 100 to 600 MHz

RF Amplifier  from Tomco Technologies

The BT00100-Delta from Tomco Technologies is a Class AB Pulsed/CW Amplifier that operates from 100 to 600 MHz. It delivers an output power of more than 100 W in pulsed mode and an output power of 10 W in CW mode with a gain of over 50 dB. The amplifier has a pulse width of 300 ms and a duty cycle of up to 20 %. It offers high linearity, phase stability, amplitude stability and has low inter-pulse noise.
Download Datasheet | Product Details
Waveguide to Coax Adapter
High Power Waveguide to Coaxial Right Angle Adapters from 2.60 to 18 GHz

Waveguide to Coax Adapter  from L3Harris Narda-ATM

The 253UHPA Series from L3Harris are Waveguide to Coaxial Right Angle Adapters that operate from 2.60 to 18 GHz. These adapters can handle CW input power of up to 2000 W and a peak input power of 6 kW. They have an insertion loss of less than 0.16 dB and have a VSWR of below 1.35:1. These adapters are available with custom airline N-type (female) connectors on one end and multiple flanged waveguide interfaces on the other end.
Download Datasheet | Product Details
Directional Coupler
3-Port Uni-Directional Coupler from 300 MHz to 3 GHz

Directional Coupler  from Werlatone Inc

The C8671 from Werlatone is a 3-Port Uni-Directional Coupler that operates from 300 to 3000 MHz. It has a coupling factor of 10 dB ± 1 dB and a directivity of more than 15 dB. The coupler has an insertion loss of less than 0.35 dB. It can handle an average input power of 100 W CW and has a VSWR of 1.2:1. This directional coupler consists of a main line and a coupled line.
Download Datasheet | Product Details
Sponsored by MilliBox
 
 
 
RF Transceiver
Sub-GHz RF Transceiver IP for NB-IoT Applications

RF Transceiver  from Palma Ceia SemiDesign

The NB-IOT (LTE Cat NB1) Transceiver IP from Palma Ceia SemiDesign is an RF Transceiver that operates from 703 to 960 MHz. It delivers an output power of -10 dBm with a noise figure of 3 dB and has an IIP3 of -17 dBm. This low power transceiver is built to comply with the LTE Advanced Release 13 standards from 3GPP. The transceiver is easily programmable via the SPI interface and is ideal for NB-IoT applications.
Download Datasheet | Product Details
RF Amplifier
Space-Qualified Variable Gain Amplifier from 10 to 500 MHz

RF Amplifier  from Analog Devices

The AD8367S from Analog Devices is a Space-Qualified Variable Gain Amplifier that operates from 10 to 500 MHz. It has a gain control range of 45 dB which can be controlled via an externally applied voltage from 0 to 1 V with 20 mV/dB sensitivity. The AD8367S requires a DC supply of 3.00-5.25 V and can operate across a temperature range from -55 to +110 °C.
Download Datasheet | Product Details
RF Amplifier
Miniature Cryogenic Amplifiers from 1 to 20 GHz

RF Amplifier  from Atlantic Microwave

The AOX Series from Atlantic Microwave are Miniature Cryogenic Amplifiers that operate from 1 to 20 GHz. They provide a gain of 27 dB and have a multi-octave bandwidth. These amplifiers are based on GaAs pHEMT distributed amplifier MMIC technology and have proprietary matching circuits. They can operate over a temperature range from -269 to +100°C.
Download Datasheet | Product Details
OCXO
10 to 50 MHz OCXO Available in Ultra-Compact 7x5 mm Package

OCXO  from Rakon

The ROM7050PA from Rakon is a compact OCXO with an oscillation frequency from 10 to 50 MHz. It has a very small 7x5 mm footprint and meets the stringent requirements of 5G Remote Radio Heads (RRH), small cells, optical network, and microwave transmission systems. It provides a CMOS waveform (1ns, 55%) at the output while operating from a supply voltage of 3.3 V.
Download Datasheet | Product Details
Frequency and Time Standard
Optically-Pumped Cesium Atomic Clock

Frequency and Time Standard  from AXTAL

The AXCS9000STD from AXTAL is a Cesium Primary Reference Clock with excellent long-term stability. It has multiple outputs for 5 MHz, 10 MHz and 1 PPC with very low phase noise and jitter. The clock delivers sine wave/square wave/TTL output with frequency stability of 5 x 10-13 and has long-term stability of 5 x 10-14.
Download Datasheet | Product Details
RF Shielded Test Enclosure
20 MHz to 6 GHz Shielded Test Box

RF Shielded Test Enclosure  from RF Electronics

The HDRF-1549 from RF Electronics is a shielded test box that can be used to create an isolated environment up to 6 GHz. The test box measures 1140 mm (W) X 340 mm (H) X 350 (D). It provides isolation of over 130 dB up to 1 GHz and 90 dB at 6 GHz. It can be used to test all sub 6 GHz applications like WLAN, 802.11 a/b/g/n/ac, Bluetooth, 3G/4G, etc.
Download Datasheet | Product Details
RF Switch
SPDT Reflective PIN-Diode Switch from 18 to 40 GHz

RF Switch  from Mercury Systems

The SRMG9EL2-001 from Mercury Systems is an SPDT Reflective PIN-Diode Switch that operates from 18 to 40 GHz. It has an insertion loss of less than 3.0 dB and provides an isolation of more than 30 dB. The switch has a VSWR of less than 2.5:1 and a switching speed of less than 500 ns. This switch offers an integrated driver controlled by TTL or CMOS signals.
Download Datasheet | Product Details
RF Amplifier
3.5 W GaAs MMIC Power Amplifier from 28.5 to 32 GHz

RF Amplifier  from SuperApex Corporation

The SAC3127 from SuperApex Corporation is a GaAs MMIC Power Amplifier that operates from 28.5 to 32 GHz. It provides a P1dB of 35.5 dBm with a small signal gain of over 21 dB and has a PAE of 23%. This Ka-band amplifier requires a 6V power supply. It is available as a die that measures 3.55 x3.8 x0.1 mm and is ideal for use in microwave radios, telecommunication systems, test instrumentation, and SATCOM.
Download Datasheet | Product Details
RF Mixer
Double-Balanced Mixer MMIC from 2 to 12 GHz

RF Mixer  from Marki Microwave

The MM1-0212S from Marki Microwave is a Double-Balanced GaAs MMIC Mixer with an RF/LO frequency from 2 to 12 GHz and an IF frequency from DC to 3 GHz. It has a conversion loss of less than 11.5 dB and a noise figure of 9 dB. The mixer provides an LO to RF isolation of 47 dB, LO to IF isolation of 49 dB and RF to IF isolation of 39 dB.
Download Datasheet | Product Details
RF Power Meter
40 GHz Benchtop Power Meter with Four USB Controlled Power Sensors

RF Power Meter  from Boonton

The PMX40 from Boonton is an RF Power Meter that operates from 4 kHz to 40 GHz. Its intuitive, multi-touch display enables fast configuration of up to four USB sensors as well as easy access to measurement and analysis tools, providing a standalone solution for capturing, displaying, and analyzing peak and average RF power in both the time and statistical domains.
Download Datasheet | Product Details
Block Up Converter
X-Band Block Up Converter from 7.9 to 8.4 GHz

Block Up Converter  from ACORDE

The ACTX-X200W from ACORDE is an X-Band GaN BUC that up-converts an input frequency from 950 - 1450 MHz to an output frequency from 7.9 - 8.4 GHz. It has a P1dB of 53 dBm, a gain of more than 75 dB and a noise figure of less than 15 dB. The BUC has a phase noise of -110 dBc/Hz @ 100 kHz offset, a spurious level of less than -60 dBc and harmonics of lower than -50 dBc.
Download Datasheet | Product Details
Front End Module
GNSS Front End Module for Automotive Applications

Front End Module  from New Japan Radio

The NJG1159PHH-A from NJR is a GNSS Front End Module that supports GPS, GLONASS, BeiDou, and Galileo constellations. It consists of an integrated LNA and a pre-SAW filter that enable it to offer a low noise figure, high linearity, and high out-band rejection characteristics. It requires a DC supply of 2.8 V and consumes a current of up to 3.7 mA.
Download Datasheet | Product Details
Wireless Charging Receiver
15 W Wireless Power Receiver for Battery-Operated Devices

Wireless Charging Receiver  from Renesas

The P9221-R from Renesas is a Qi-Compliant Wireless Power Receiver for power applications of up to 15 W. It uses magnetic inductive charging technology to convert an AC power signal from a resonant tank to a programmable regulated 9V or 12V DC output voltage. This power receiver has a programmable current limit and foreign-object detection (FOD) and can be controlled via an I2C interface.
Download Datasheet | Product Details
Antenna
3-in-1 GNSS (Active), LTE and Wi-Fi External Antenna

Antenna  from AVX Corporation

The X1005244-LWA3SX10A2 from AVX Corporation is a 3-in-1 GNSS (active), LTE and WiFi external antenna. This 3 port antenna covers the (1561 / 1575 / 1602 MHz) + (698-960, 1710-2170; 2300-2690) MHz + (2400-2500; 5150-5850) MHz bands. The active GNSS antenna provides a gain of 1.1 dBi and has an integrated LNA that provides a gain of 28 dB and noise figure of 3 dB.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events, white papers, articles, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]