PREV 11th July, 2018 NEXT

New RF & Microwave Products this Week

11 July, 2018 - everything RF Newsletter
 
everything RF
Date: 11 July, 2018
 
Sponsored by PCB Directory
 
 
 
New RF Products this Week
Vector Network Analyzer
3-port Computer Controlled VNA from 400 MHz to 4 GHz

Vector Network Analyzer from MegiQ

The VNA-0440e from MegiQ is a two and a half port bidirectional vector network analyzer that operates from 400 MHz to 4 GHz. This modular VNA can measure complete S Parameters for 2 ports and S13, S23 for the 3rd port. It is controlled via a PC through a USB interface. The VNA is ideal for measuring all kinds of micro-circuits like antennas, attenuators, amplifiers etc.
 
Download Datasheet | Product Details
 
RF Module
LoRaWAN + BLE Module with Integrated Antenna

RF Module from Onethinx

The Onethinx LoRaWAN Core module is a ready-to-use LoRaWAN + Bluetooth low energy module. It consists of Cypress's PSoC 6 with built-in Bluetooth Low Energy wireless connectivity and Semtech's sub-GHz radio transceiver SX1261. The module can transmit up to +15 dBm of power with a highly efficient integrated power amplifier and consumes up to 4.2 mA of current in receive mode.
 
Download Datasheet | Product Details
 
Band Pass Filter
2.58 GHz S-Band Combline Filter

Band Pass Filter from Exceed Microwave

The BPF-C-00032 from Exceed Microwave is a S-Band Combline Filter with a center frequency of 2.58 GHz and bandwidth of 200 MHz. The filter has an insertion loss of under 0.3 dB and return loss of more than 20 dB. It is available in a silver plated aluminium housing that measures 10 x 3 x 1.5 inches with SMA connectors.
 
Download Datasheet | Product Details
 
RF Amplifier
0.1 to 18 GHz Low Noise Cryogenic Amplifier

RF Amplifier from AmpliTech

The APTC4-00101800-2510-D4-T from Amplitech is a low noise cryogenic amplifier that operates from 0.1 to 18 GHz. This amplifier has a gain of 23 dB, flatness of 2.5 dB and a noise figure of less than 2.5 dB. It can provide an output power of 10 dBm. The amplifier is available in a module with SMA connectors.
 
Download Datasheet | Product Details
 
Power Divider
30 W, 2-Way Power Divider from 0.7 to 2.7 GHz

Power Divider from P1dB Inc.

The P1PDE-SAF-0R72R7G30W-2 from P1dB is a 2-way power divider that operates from 0.7 to 2.7 GHz. It has an insertion loss of 0.5 dB, an isolation of 22 dB and a VSWR under 1.25:1. The power divider can handle up to 30 W of average power. It is available in an aluminium package with SMA female connectors.
 
Download Datasheet | Product Details
 
90 Degree Hybrid Coupler
90 Degree Hybrid Coupler from 20 to 1000 MHz

90 Degree Hybrid Coupler from Werlatone Inc

The QH10738 is a 90 Degree Surface Mount Hybrid Coupler that operates from 20 to 1000 MHz. It can handle up to 150 Watts of CW power, has an insertion loss of under 0.8 dB, isolation of over 20 dB and a VSWR of 1.40:1. This surface mount coupler has a phase balance of +/- 12 Degrees and amplitude balance of +/- 0.25 dB.
 
Download Datasheet | Product Details
 
Directional Coupler
10 dB Directional Coupler from 0.3 to 8 GHz

Directional Coupler from Werbel Microwave

The WMDC10-0.3-8-S-A3 from Werbel Microwave is a directional coupler that operates from 300 MHz to 8 GHz. It has a coupling value of 10 dB, directivity of over 18 dB and an insertion loss of under 1.7 dB. It can handle up to 20 watts of power and has a VSWR of 1.30:1. The coupler is available in a module that measures 6 x 0.73 x 0.50 inches with SMA female connectors.
 
Download Datasheet | Product Details
 
RF Shielded Test Enclosure
RF Shielded Test Enclosure for 802.11 a/b/g/n/ac, Bluetooth, RFID and 3G Device Testing

RF Shielded Test Enclosure from RF Electronics

The HDRF-2124-T from RF Electronics is a RF Shielded Test Enclosure that operates from 20 MHz to 6 GHz. It has a thick RF absorbing foam that provides an isolation of more than 90 dB. It has shielded power filters for providing power connection in the box while blocking all wireless signals. The HDRF-2124-T has a number of I/O connector options that include HDMI, RJ45, USB, DB9, VGA, DB25 and AC/DC.
 
Download Datasheet | Product Details
 
Front End Module
2.4 GHz WLAN Front End Module

Front End Module from Skyworks Solutions

The SKY85309-11 is a 2.4 GHz WLAN Front End Module that has been developed for PC Cards and routers. The FEM consists of a SPDT switch, low noise amplifier and a power amplifier for high power 802.11 applications. An integrated power detector has been integrated to provide closed loop power control within the system. It is available in a 24 pin, 3 x 5 mm QFN package.
 
Download Datasheet | Product Details
 
Antenna
3.6 dBi, 2.4/5 GHz Flexible WiFi Antenna

Antenna from MOLEX

The 206994-0100 from Molex is a small monopole flexible WiFi antenna that operates in the 2.4/5 GHz bands. It provides a gain of up to 3.6 dBi with an efficiency of over 55% and can handle an input power of below 2 watts. The antenna measuring 15.4 x 6.4 x 0.15 mm, has a double-sided adhesive tape which can be easily peeled and pasted on any surface.
 
Download Datasheet | Product Details
 
RF Amplifier
10 W Solid State Power Amplifier from 6 to 18 GHz

RF Amplifier from KeyLink Microwave

The KB60180M40A from KeyLink Microwave is a multi-octave high power amplifier that operates from 6 to 18 GHz. This GaN amplifier provides a saturated output power of 10 Watts with a gain of 40 dB. It is available in a module that measures 150 x 90 x 25 mm with SMA female connectors and is ideal for for jamming, EMC, test and measurement applications.
 
Download Datasheet | Product Details
 
RF Amplifier
K-Band Low Noise Amplifier from 17.7 to 22 GHz

RF Amplifier from ERZIA

The ERZ-LNA-1770-2200-70-2 from ERZIA is a K band Low Noise Amplifier that operates from 17.7 to 22 GHz. It provides a high gain of 70 dB with a low noise figure of 2 dB across the band. The amplifier includes an output isolator and requires a supply voltage of 18 V. It is available in a module with a WR42 interface at the input and 2.92 mm Female connectors at the output.
 
Download Datasheet | Product Details
 
RF Cable Assembly
N plug to N jack Super Flexible Cable Assembly up to 18 GHz

RF Cable Assembly from Jyebao

The N30N80-63-18GXXX from Jyebao is an N plug to N jack super flexible cable assembly that operates up to 18 GHz. This test cable is available in different lengths and has a return loss of 18 dB. It can operate over a wide temperature range from -40 to 85 C.
 
Download Datasheet | Product Details
 
Waveguide Attenuator
70 dB, E-Band Direct Reading Attenuator from 60 to 90 GHz

Waveguide Attenuator from SAGE Millimeter

The STA-60-12-D8 from Sage Millimeter is an E-band direct reading, rotary vane attenuator that operates from 60 to 90 GHz. The attenuator has a large scale calibrated dial which indicates the attenuation value directly. It has an attenuation range of up to 70 dB, an insertion loss of 1 dB and can handle an input power of up to 100 mW.
 
Download Datasheet | Product Details
 
Signal Generator
8 kHz to 3 GHz / 6 GHz Vector Signal Generator

Signal Generator from Rohde & Schwarz

R&S SMBV100B from Rohde & Schwarz is a Vector Signal Generator that operates from 8 kHz to 3 GHz or 6 GHz. This generator can deliver up to 34 dBm of output power and also provides envelope tracking and digital predistortion (DPD). It provides excellent signal quality for vector-modulated signals, with a powerful baseband section with up to 500 MHz bandwidth.
 
Download Datasheet | Product Details
 
Sponsored by PCB Directory
 
 
 
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest industry news, white papers, information on new product releases, technical articles and much more.

To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]