1. everything RF
  2. RF Newsletters
more
PREV 16th July, 2018 NEXT

Latest RF News & White Papers this Week

16 July, 2018 - everything RF Newsletter
 
everything RF
Date: 16 July, 2018
 
Sponsored by PCB Directory
 
 
 
Latest News this Week
IMS 2018 Highlights 5G, Microwaves, Medicine and Mobility - IEEE MTT
NXP RFID/NXP Solutions Deliver Smart & Secure Connectivity for the 2018 FIFA World Cup - NXP Semiconductors
Leti & Soitech to Develop & Prototype New Engineered Substrate Solutions - Leti
Skyworks Wireless Solutions Powering Google's Nest Video Doorbells - Skyworks Solutions
NI Introduces mm-Wave Radio Heads Targeted at 5G NR Research and System Prototyping - National Instruments
Cyient Unveils Transformational X-Band Transmit and Receive Module - Cyient
Tektronix Upgrades its Wideband RF Signal Analyzer to Better Test Radar and EW Systems - Tektronix, Inc.
Anritsu VNAs Now Equipped with Differential Noise Figure Measurement Capability - Anritsu
Industry’s First 5.2 GHz BAW RF Co-Existence Filter for 4G LTE and 5G Mobile Devices - Akoustis
Researchers Develop Ultra-Miniaturized IC with On-Chip Antenna to Boost Spectrum Efficiency - Georgia Institute of Technology
More News
New White Papers
Using mmWave Sensors to Enhance Drone Safety and Productivity - Texas Instruments
Microwave Power Dividers and Couplers Tutorial - Marki Microwave
4 Ways to Build Your Power Supply Skill Set - Keysight Technologies
An Introduction to Programmable Attenuator Systems - JFW Industries
What are RF Pick-Off Tees? - Marki Microwave
More White Papers
Upcoming Event
Event Image
European Microwave Week 2018

Date: 23 to 28 September 2018

Location: Madrid, Spain

 
More Events
Featured Products this Week
Vector Network Analyzer
6 GHz Low Cost, High Performance USB-controlled VNA

Vector Network Analyzer from Pico Technology

The PicoVNA 106 is a 2 Port USB-controlled, laboratory grade vector network analyzer that operates from 300 kHz to 6 GHz. This compact, low cost, high-performance VNA has a four-receiver architecture to eliminate errors, delays and fragility of three-receiver designs with internal transfer switches.
 
Download Datasheet | Product Details
 
Vector Network Analyzer
8/20/43.5 GHz PC Controlled Vector Network Analyzers

Vector Network Analyzer from Anritsu

The MS46122B is a series of three PC-controlled Compact ShockLine Vector Network Analyzers from Anritsu which operate from 1 MHz to 8/20/43.5 GHz. These 2 port compact VNAs have a sweeping speed of 220 us per point with a dynamic range of up to 100 dB and a directivity of 37 dB. They are low cost full-reversing VNAs targeted at RF and microwave applications in manufacturing, engineering and education.
 
Download Datasheet | Product Details
 
Vector Network Analyzer Extender
140 to 220 GHz Vector Network Analyzer Extender

Vector Network Analyzer Extender from Virginia Diodes, Inc.

The WR5.1-VNAX from Virginia Diodes is a Vector Network Analyzer Extender the extends VNA operation upto 220 GHz. The frequency extender has a dynamic range of 120 dB, directivity of 30 dB, magnitude stability of 0.25 dB and phase stability of 4 degrees. It can provide an output power at the test port of up to -1 dBm and has a WR-5.1 waveguide interface. VDI can customize the input frequency based on a customers requirement.
 
Download Datasheet | Product Details
 
RF Amplifier
50 W Hybrid Power Amplifier Module from 0.7 to 6 GHz

RF Amplifier from AR RF/Microwave Instrumentation

The 50HM1G6-47 from AR RF/Microwave Instrumentation is a compact, wideband, hybrid power amplifier module that operates from 0.7 to 6 GHz. It provides a small signal gain of 55 dB with excellent gain flatness, noise figure of 8.5 dB and low intermodulation distortion. It is available in a module that measures 35 x 22 x 2.54 cm with SMA female connectors.
 
Download Datasheet | Product Details
 
RF Amplifier
200 W Solid State GaN Power Amplifier from 6 to 18 GHz

RF Amplifier from Exodus Advanced Communications

The AMP2065A is a solid state GaN power amplifier that operates from 6 to 18 GHz. It provides a saturated output power of more than 200 watts with a gain of over 53 dB. The amplifier has a wide instantaneous bandwidth and is suitable for all single channel modulation standards. It is available as a rack mount amplifier that measures 482 x 311 x 600 mm and weighs 150 lbs.
 
Download Datasheet | Product Details
 
Power Divider
16-Way Power Divider from 698 to 2700 MHz

Power Divider from INSTOCK Wireless Components

The PD5016 from INSTOCK Wireless Components is a 16-way power divider that operates from 698 to 2700 MHz. It has an insertion loss of less than 1.8 dB with an isolation of more than 20 dB. The divider can handle up to 40 watts of power and has a VSWR of under 1.50:1. It is available in a module with N-type female connectors.
 
Download Datasheet | Product Details
 
Directional Coupler
35 dB Directional Coupler from 1500 to 3000 MHz

Directional Coupler from Sigatek

The CP351189N from Sigatek is a Directional Coupler that operates from 1500 to 3000 MHz. This 35 dB coupler has an insertion loss of less than 0.2 dB and a directivity of over 20 dB. The coupler can handle an input power of up to 500 watts and is available in a module with N connectors.
 
Download Datasheet | Product Details
 
Dual Directional Coupler
500 to 2500 MHz Dual Directional Surface Mount Coupler

Dual Directional Coupler from Innovative Power Products

The IPP-8057 from Innovative Power Products is a dual directional coupler that operates from 500 to 2500 MHz. It has a coupling value of 33 dB, an insertion loss of less than 0.25 dB, directivity of over 20 dB and a VSWR of 1.25:1. The coupler can handle up to 150 W of average power and is available in a surface mount module that measures 0.50 x 1.00 inches.
 
Download Datasheet | Product Details
 
Balun
Surface Mount Balun from 5 MHz to 1200 MHz

Balun from MiniRF

The MRFXF5532 from Mini RF is a Balun (unbalanced to balanced transformer) that operates from 5 MHz to 1200 MHz. It has been designed for applications that require small, low cost, and highly reliable surface mount components. The transformer has an insertion loss of less than 2 dB and can handle up to 2 W of power.
 
Download Datasheet | Product Details
 
DLVA
DLVA from 2 to 8 GHz with a dynamic range of -65 to 0 dBm

DLVA from Planar Monolithics Industries

The EWDM-2G8G-65-70MV from PMI is a DLVA that operates from 2 to 8 GHz. The DLVA has a dynamic range from -65 to 0 dBm and TSS of -71 dBm. It has an internal switch which is used to switch between the BIT IN and RF IN ports (when one is active, the other is blank). The DLVA is available in a module with SMA female connectors at the RF & Video ports and a 9 Pin D-Sub female connectors at the DC Power & Control interface.
 
Download Datasheet | Product Details
 
RF Amplifier
Ku-Band Waveguide Low Noise SATCOM Amplifier

RF Amplifier from AmpliTech

The APTW6-10701275-75K10-WR75-D6 from AmpliTech is a high gain, low noise SATCOM amplifier that operates from 10.7 to 12.75 GHz. It delivers a gain of more than 60 dB with a noise figure of 0.88 dB and an output power of 15 dBm. This amplifier is pressurizable to 5 psi and has an inbuilt reverse voltage protection. It is available in a module with connector and is ideal for SATCOM applications, such as for military and civil satellite downlinks.
 
Download Datasheet | Product Details
 
RF Switch
High Power Absorptive SP4T Switch from 2 to 18 GHz

RF Switch from UMCC

The SR-S070-4S from UMCC is an absorptive SP4T PIN-Diode Switch that operates from 2 to 18 GHz. It has an insertion loss of 3.4 dB, an isolation up to 85 dB and a VSWR under 2.0:1. The switch has a rise/fall time of 25 ns and can handle an average power of 24 dBm and peak power of up to 5W. It is available with SMA connectors.
 
Download Datasheet | Product Details
 
RF Variable Attenuator
70 dB, Manual Step Attenuator from DC to 26.5 GHz

RF Variable Attenuator from API Technologies - Weinschel

The 9012-70 from API Technologies - Weinschel is a Manual Step Attenuator that operates from DC to 26.5 GHz. It has an attenuation range of 70 dB with a step size of 10 dB, the attenuation can be controlled using a rotary knob. The attenuator can handle an input average power of up to 2 Watts (CW) and peak power of up to 200 kW.
 
Download Datasheet | Product Details
 
Low Pass Filter
Miniature Harmonic Low Pass Filter from DC to 2500 MHz

Low Pass Filter from NuWaves Engineering

The NuFilter 05LPLE-2500 is a low-cost Miniature Harmonic low-pass RF Filter designed to reduce harmonics at the output of transmitters operating at up through S-Band. This high-performance module can handle up to 50 Watts of input power, with a 0.5 dB of insertion loss in the passband frequency range from DC to 2500 MHz.
 
Download Datasheet | Product Details
 
RF Cable Assembly
Right Angle SMA-Plug to SMA-Jack Flexible Cable Assembly

RF Cable Assembly from Jyebao

The A39A85-52L-18GXXX from Jyebao is a SMA plug right angle to SMA jack flexible cable assembly that operates up to 18 GHz. This test cable is available in different lengths and has a return loss of 16.5 dB.
 
Download Datasheet | Product Details
 
Dual Directional Coupler
250 W Dual Directional Coupler from 4 to 8 GHz

Dual Directional Coupler from MegaPhase

The DDC-30N-6G from MegaPhase is a Dual Directional Coupler that operates from 4 to 8 GHz. This 30 dB coupler has a directivity of over 18 dB and an insertion loss of under 0.20 dB. It can handle an input power of up to 250 watts. The coupler is available in a module with Type-N jack and is designed to meet MIL-DTL-15370 standard.
 
Download Datasheet | Product Details
 
Sponsored by PCB Directory
 
 
 
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest industry news, white papers, video coverage, interviews, new product information and much more.

To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]