PREV 18th July, 2018 NEXT

New RF & Microwave Products this Week

18 July 2018 - everything RF Newsletter
 
everything RF
Date: 18 July 2018
 
Sponsored by Mouser
 
 
 
New RF & Microwave Products this Week
Power Divider
8-Way Power Divider from 10 to 40 GHz

Power Divider from Pulsar Microwave

The PS8-53-454/4S from Pulsar Microwave is a 8 Way power divider that operates from 10 to 40 GHz. It can handle a power of up to 30 Watts of power with an isolation of 12 dB and insertion loss of 2.5 dB. The power divider has an amplitude balance of 0.8 dB and phase balance of 12 degrees. It is available in a module that measures 4.0 X 2.0 X 0.40 inches with 2.92 mm female connectors.
 
Download Datasheet | Product Details
 
Frequency Synthesizer
50 MHz to 21 GHz Frequency Synthesizer

Frequency Synthesizer from Micro Lambda Wireless, Inc.

The MLVS-0520 from Micro Lambda Wireless is a frequency synthesizer that operates from 50 MHz to 21 GHz with a frequency resolution of 0.001 Hz. The synthesizer has low phase noise and provides an output power of 15 dBm. It has a switching speed of under 50 µsec. The MLVS-0520 is available in a module that measures 4 x 3.6 x 0.94 inches and is ideal for test equipment, local oscillators and frequency convertors.
 
Download Datasheet | Product Details
 
Analog Phase Shifter
Ka-Band Analog Phase Shifter from 25.5 to 32.5 GHz

Analog Phase Shifter from Arralis

The LE-Ka1360306 variable phase shifter from Arralis operates from 25.5 to 32.5 GHz providing 360 degrees of controlled phase variation. It has a low insertion loss variation and excellent phase tracking across the entire frequency band. The phase shift can be controlled by a voltage from -0.5 V to 1.7 V.
 
Download Datasheet | Product Details
 
Phase Noise Analyzer
10 MHz to 26 GHz Real-Time Phase Noise Analyzer

Phase Noise Analyzer from Holzworth Instrumentation

The HA7062C from Holzworth is a real time fully integrated phase noise analysis system that operates from 10 MHz to 26 GHz. It utilizes the same core engine from the HA7402C analyzer along with a pair of high performance RF Synthesizers as the test signal LOs. The stability of the agile synthesizers operating as LO sources for the high speed, cross-correlation core enables an extremely reliable phase noise analyzer.
 
Download Datasheet | Product Details
 
RF Cable Assembly
Low Cost Broadband Test Cables for Applications up to 67 GHz

RF Cable Assembly from MegaPhase

These test cables from MegaPhase operate at frequencies up to 67 GHz. They are phase and amplitude stable and have been optimized to provide consistent and repeatable performance across a wide bandwidth. The cables are built-to-order with 1.85 mm connectors, including connectors that mate directly with 1.85 mm VNA ports. They are available in lengths from 12 inches to 25 feet (30 cm to 8 m).
 
Download Datasheet | Product Details
 
Band Pass Filter
3.8 GHz BAW RF Filter for Radar Applications

Band Pass Filter from Akoustis

The AKF-1938 is a 3.8 GHz BAW RF filter designed for use in radar and RF transceiver applications. It provides a low insertion loss covering 100 MHz of bandwidth with a high rejection of over 40 dB. The filter is available in an ultra-small module that measures 2 x 2.5 x 0.9 mm and operates over a temperature range from -40 C to +105 C.
 
Product Details
 
Sponsored by Mouser
Molex-Cellular-Flexible-Antennas
Mouser Supplying Cellular Antennas for Development of Evolving LTE and 4G Technologies.
Molex Cellular Flexible Antennas have a balanced transmission design that minimizes ground-plane effects - eliminating additional circuitry, frequency tuning and electronic component integration for reduced costs. They feature a poly-flexible, double-sided adhesive tape for peel-and-stick mounting. Click here to Learn More.
 
 
 
RF Switch
100 MHz to 44 GHz Non-Reflective SPDT Switch

RF Switch from Analog Devices

The ADRF5026 is an absorptive SPDT Switch that operates from 100 MHz to 44 GHz. The switch has a low insertion loss of 3.8 dB and provides a high port to port isolation of 45 dB. It can handle an input power of up to 24 dBm. The switch has an All Off Control, which isolates both the RF ports. This broadband switch requires dual supply voltages of +3.3 V and -3.3 V and provides CMOS/LVTTL logic-compatible control.
 
Download Datasheet | Product Details
 
RF Switch
DPDT RF CMOS Antenna switch for LTE and WCDMA Applications

RF Switch from Infineon Technologies

The BGSX22G2A10 from Infineon is a DPDT RF CMOS switch specifically designed for LTE and WCDMA triple antenna applications. The switch operates from 0.1 to 6.0 GHz and offers a low insertion loss and low harmonic generation paired with high isolation between RF ports. It is controlled via a GPIO interface and requires a supply voltage from 2.3 V to 3.4 V.
 
Download Datasheet | Product Details
 
RF Amplifier
0.5 to 8 GHz Low Noise Amplifier with 44 dB Gain

RF Amplifier from Elite RF

The M.50008G2144VV from Elite RF is a broadband low noise amplifier that operates from 0.5 to 8 GHz. It provides a gain of up to 44 dB with a noise figure of 1.5 dB. The amplifier delivers an output power of over 20 dBm while operating from a supply voltage of 8 to 18 VDC. It is available in a module that measures 3.5 x 3 x 1 inches and is ideal for CW/Digital/Pulse signals and general purpose amplification applications.
 
Download Datasheet | Product Details
 
RF Amplifier
10,000 W Solid State Power Amplifier from 0.5 to 1 GHz

RF Amplifier from Exodus Advanced Communications

The AMP2131P from Exodus Advanced Communications is a rack mounted Class AB LDMOS Amplifier that operates from 0.5 to 1 GHz. It provides a pulsed output power of more than 10,000 watts with a power gain of over 70 dB. The amplifier has built in control, monitoring and protection circuits and has been developed for use in rugged environments.
 
Download Datasheet | Product Details
 
RF Amplifier
90 W Hybrid Power Amplifier from 1 to 6 GHz

RF Amplifier from AR RF/Microwave Instrumentation

The 100HM1G6AB-50 from AR RF/Microwave Instrumentation is a compact hybrid amplifier that operates from 1 to 6 GHz. The amplifier provides an output power of 90 watts with a small signal gain of 64 dB and excellent flatness, noise figure and intermodulation distortion over the band. This power amplifier can be used by both military and commercial industries.
 
Download Datasheet | Product Details
 
Signal Generator
RF Player and Signal Generator from 140 kHz to 2.5 GHz

Signal Generator from Averna

The URT-5000 from Averna is a software-defined RF Player and Signal Generator that operates from 140 kHz to 2.5 GHz. This signal source can generate and play back all common Navigation and Broadcast Radio signals like AM/FM, GPS and XM for receiver testing, production and support. It supports RF playback of real-world conditions, often too complex to simulate, captured with Record & Playback field instruments.
 
Download Datasheet | Product Details
 
Sponsored by Mouser
 
 
 
Vector Network Analyzer
300 kHz to 20 GHz USB-Controlled Compact Vector Network Analyzer

Vector Network Analyzer from Keysight Technologies

The P9374A from Keysight is a USB-Controlled Compact Vector Network Analyzer that operates from 300 kHz to 20 GHz. Controlled via PC through a USB connection, this VNA help customers save space on the test bench and is easily shared among members of a development team. The 2 port compact VNA has a measurement speed of 14 msec with a dynamic range of up to 115 dB and a directivity of below 52 dB.
 
Download Datasheet | Product Details
 
Power Divider
2-Way Resistive Power Divider from DC to 26.5 GHz

Power Divider from MECA

The 802-3-13.250 from MECA is a 2-way resistive power divider that operates from DC to 26.5 GHz covering up to Ku band. It can handle up to 1 watt of power, has an insertion loss of under 8.5 dB and a VSWR of 1.40:1. The power divider is available in a module with 2.92 mm connectors.
 
Download Datasheet | Product Details
 
Voltage Controlled SAW Oscillator
350 to 4000 MHz Radiation Tolerant Voltage Controlled SAW Oscillators

Voltage Controlled SAW Oscillator from API Technologies

The AP725 Series from API are Radiation Tolerant Voltage Controlled SAW Oscillators (VCSOs) which can be tuned to a frequency from 350 to 4000 MHz with a tuning voltage from 2 to 12 V. The VCSOs deliver low phase noise of -109 dBc/Hz at 1 kHz offset and low vibration sensitivity of 2 x 10-9 per g. These oscillators have been tested with radiation exposure up to 200 kRad.
 
Download Datasheet | Product Details
 
RF Switch
SP8T Electro-Mechanical Switch from DC to 18 GHz

RF Switch from JFW Industries

The 50S-1614+XX from JFW Industries is an Electro-Mechanical SP8T Switch that operates from DC to 18 GHz. This switch has eight control lines and each control line is activated with a DC Voltage (i.e. 12 Vdc, 15 Vdc, 24 Vdc or 28 Vdc). Only one control line can be active at a time. The switch can handle up to 500 watts of power and has a switching speed of 15 milliseconds.
 
Download Datasheet | Product Details
 
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We product information on the latest product releases on the site and via our weekly newsletters. We also provide comprehensive industry news coverage, new white papers, calculators and other useful information for engineers in the RF/Microwave/Wireless sector.

To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]